3D Innovations Gas Grill C 150 User Manual

OLYMPUS AMERICA INC.  
OLYMPUS OPTICAL CO. (EUROPA) GMBH  
Wendenstrasse 14-18,  
QuickStart Guide  
Two Corporate Center Drive, Melville,  
NY 11747-3157, U.S.A.  
20097 Hamburg, Germany  
D-390 / C-150  
UNPACKING THE BOX CONTENTS  
Gather your digital camera and the parts as shown in the illustration. You’ll need these to complete the steps for the  
camera set-up procedures that follow.  
START HERE  
It is strongly recommended that you follow these  
step-by-step numbered instructions to set up and  
quickly begin using your new Digital Camera.  
Strap  
AA (R6) alkaline  
batteries (x2)  
CAMEDIA  
Master CD-ROM  
USB cable  
(grey color)  
xD-Picture Card  
Digital camera  
For more detailed instructions on advanced features, please refer  
to the printed Basic Manual included in your package, or the  
Reference Manual on the CD-ROM.  
The following items are also included in this package: Basic Manual, video cable, warranty card, registration card (not  
pvovided in some areas), and safety precautions booklet.  
• Close the battery compartment cover so that it pushes the batteries down inside. While pressing  
the  
mark, slide the cover in the opposite direction of  
.
PREPARE THE CAMERA FOR USE  
TIP: An optional Olympus E-7AC AC adapter is available, and is recommended when downloading images to ensure a  
consistent power supply. See the Basic Manual for more information.  
Before you begin using your Olympus digital camera…  
b.Insert the xD-Picture Card  
a.Loading batteries  
The xD-Picture Card is where the camera stores your pictures and is available in a variety  
of memory capacities. The pictures you take with the camera remain on the xD-Picture  
Card even when the camera is turned off and/or the batteries are removed.  
• Slide the battery compartment cover in the direction of  
A
(the direction indicated by the  
and lift it up in the direction of  
mark on the cover),  
B
.
A
• Insert the xD-Picture Card into the spring-loaded card slot as shown  
in the illustration. Push the card fully into the slot. The card will lock  
into place when fully inserted.  
B
To remove, push down on the xD-Picture Card. The card will pop up.  
Pull to remove.  
• Close the card cover.  
• Insert batteries in the direction shown in the illustration.  
Confirm you have installed the batteries and xD-Picture Card properly by  
pressing  
. The "No Picture" message should be displayed in the monitor.  
Turn the camera off by pressing  
again.  
c.  
Attach the strap (OPTIONAL)  
Attach the strap as illustrated to make the camera easier to handle.  
There is a mark on the bottom of the  
camera showing the correct way to insert  
batteries.  
Orange lamp  
AF target mark  
Green lamp  
TURNING ON THE CAMERA  
All you need to do is slide the lens barrier open or closed to turn the camera ON or OFF.  
Viewfinder  
Monitor  
Arrow pad  
a.Turn the camera ON (SHOOTING MODE)  
Open the lens barrier.  
Close the lens barrier to turn the camera off.  
Power on  
Power off  
OK/Menu button  
Monitor button (QUICK VIEW  
Playback button (  
)
)
Lens barrier  
TIP: To maximize battery life, this digital camera features a power saving mode in which the camera enters a sleep mode after  
approximately three (3) minutes of non-use. Press the shutter button to wake up the camera.  
L R 6 X 2 o r C R - V 3 X 1  
b.Set the Date and Time (OPTIONAL)  
Although this is not required, it is recommended that you set the date and time. This affects the way image  
file names are created, and will conveniently include this information with each picture. The date and time  
can also be set when the camera is in the playback mode.  
Tripod socket  
Battery compartment cover  
• Open the lens barrier fully until it clicks.  
Camera Settings in Shooting Mode as shown in Monitor  
• Press  
to display the menu.  
Exposure compensation  
Shooting mode  
• Press to select MODE MENU.  
• Press three times to select SETUP.  
• Press once, and then twice to highlight  
• Use to select the date format.  
Battery check  
P
+2.0  
, and then press once.  
Spot metering mode  
White balance  
• Adjust the date and time in the appropriate fields by using to select the field, and  
the proper value. Repeat this step until all date/time fields have been set.  
Note: Time is entered using the 24-hour format.  
to set  
Macro  
AF target mark  
Flash mode  
Self-timer  
(still pictures only)  
• Press  
twice to set the date and time and exit the menu.  
Record mode  
HQ 1600x1200  
c.  
Camera Diagram and Controls  
Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.  
Number of storable still pictures/  
seconds remaining for movies  
Resolution (number of pixels)  
Strap eyelet Card cover  
Shutter button  
Flash  
VIDEO OUT jack  
Camera Settings in Playback Mode as shown in Monitor  
Print reserveation  
Number of prints  
Battery check  
x
Protect  
10  
Record mode  
Number pixels  
Exposure compensation  
White balance  
HQ  
SIZE: 1600x1200  
VIDEO OUT  
DC IN 3.4V  
+
2.0  
USB  
Date and time  
’03.09.12 12:30  
FILE: 100–0020  
File number, Frame number,  
Playing time/  
Total recording time  
Note:  
• Depending on the camera settings, not all indicators  
will be displayed.  
USB connector  
Lens barrier  
Self-timer lamp  
Lens  
DC-IN jack (3.4V) Connector cover  
VT450901  
Printed in China  
 

Aastra Telecom Telephone IP PBX User Manual
ALK Technologies Laptop 11 User Manual
Amana Refrigerator 3UHSDUH User Manual
American Audio CD Player DCD PRO300 User Manual
American DJ Indoor Furnishings MIC160 User Manual
American Sensor Smoke Alarm SA379 User Manual
Asus Car Video System VN279 User Manual
Avet Reels Fishing Equipment SX 53 User Manual
Axis Communications Security Camera P5415E User Manual
Behringer Music Mixer XENYX QX1222 User Manual