Addonics Technologies Computer Hardware ADSAUSPCB User Manual

ADDONICS TECHNOLOGIES  
Model: ADSAUSPCB  
ADDONICS TECHNOLOGIES  
Model: ADSAUSPCB  
SATA Port  
SATA Port  
Drive Activity  
Drive Activity  
LED Connection  
LED Connection  
2-Pin Power  
Connector  
2-Pin Power  
Connector  
USIB Connector  
USIB Connector  
Red wire  
Red wire  
Black wire  
Black wire  
Correct way of  
Correct way of  
connecting the 2-pin power cable  
to the 2-pin connector on the  
adapter  
connecting the 2-pin power cable  
to the 2-pin connector on the  
adapter  
Hardware Installation:  
Hardware Installation:  
Step 1. Connect the2-pinpower cabletothe 2-pinpowerconnector ontheadapter. Besure  
to connectthe redwire to thepinwith+5V label.  
Step 1. Connect the2-pinpower cabletothe 2-pinpowerconnector ontheadapter. Besure  
to connectthe redwire to thepinwith+5V label.  
Step 2. Connect a SATA cable to the SATA connector on the adapter and the other  
end to the SATA device.  
Step 2. Connect a SATA cable to the SATA connector on the adapter and the other  
end to the SATA device.  
Step 3. Connect a USIB cable to the USIB connector on the adapter and the other  
end to the host  
Step 3. Connect a USIB cable to the USIB connector on the adapter and the other  
end to the host  
TECHNICAL SUPPORT  
TECHNICAL SUPPORT  
Email:  
Internet:  
Email:  
Internet:  
Technical Support (8:30 am to 6:00 pm PST)  
Technical Support (8:30 am to 6:00 pm PST)  
Phone:  
Email:  
408 433-3855  
Phone:  
Email:  
408 433-3855  
 

Accusplit Fitness Electronics AL1590M12 User Manual
Acer Switch R720 Series User Manual
Acnodes Heat Pump Q5RF SERIES User Manual
AEG Washer L 70270 VFL User Manual
AKG Acoustics Microphone C 5900M User Manual
ATON Stereo Amplifier A275 User Manual
Avenview Switch SPLIT HDSDI 4 RS User Manual
Axis Communications DVR Q8108 R User Manual
Axor Plumbing Product 04195000 User Manual
BB Electronics Network Card TS W Family User Manual