Altec Lansing MP3 Docking Station iM600 User Manual

Users guide  
 
After this connection is made, insert the power supply  
into a wall outlet.  
IN M O TIO N IM 60 0  
D IG ITAL SPEAKER SYSTEM FO R IPO D ®  
DC (Battery) Pow er  
The inMotion iM600 features a built-in rechargeable  
Lithium-ion battery.  
Th e N e w St a n d a r d f r o m t h e Co m pa n y  
t h a t Se t t h e St a n d a r d  
Charging time  
up to 3 hours  
up to 5 hours  
Continuous Playing Time  
Thank you for purchasing the Altec Lansing iM600  
digital speaker system for iPod. When Altec Lansing  
introduced the original inMotion, it set new standards  
for sound and size and let a whole lot of music out of  
the iPod. Today, the new iM600 raises the bar again  
with an innovative and performance-leading design.  
Charging the rechargeable battery:  
The battery should be fully charged before initial use.  
To recharge the battery, insert the barrel connector  
from the power supply into the DC connector on the  
rear of the inMotion iM600. After this connection is  
made, insert the power supply into a wall outlet. The  
indicator light turns on. When the battery is fully  
recharged, the indicator light turns off.  
Bo x Co n t e n t s  
inMotion iM600 mobile speaker system  
Wireless remote  
When the battery icon on the LCD screen displays a  
single segment the battery should be recharged.  
When the icon starts flashing, the iM600 is about to  
shut down.  
Power supply  
Users guide and quick connect instructions  
Warning: During the recharging process it is typical for  
the battery to become warm. To be safe, keep  
M a d e f o r :  
flammable materials away from the inMotion iM600.  
iPod touch  
Note: To conserve battery power, reduce the inMotion  
iM600 volume level.  
iPod classic  
iPod with video  
Disconnecting the rechargeable battery:  
1. Unplug the inMotion iM600 from the wall outlet.  
iPod nano (3rd generation)  
iPod nano (2nd generation)  
iPod nano (1st generation)  
iPod with color display  
iPod mini  
2. Open the inMotion iM600 by pressing the button on  
the front of the speaker system.  
3. Remove the rechargeable battery compartment cover  
by removing the 2 screws.  
iPod with dock connector  
4. Unplug the battery and remove it.  
Pl a c i n g t h e IN Mo t i o n IM 60 0  
St a r t Pl a y i n g  
Open the inMotion iM600 by pressing the button on  
the front of the speaker system. Position the inMotion  
iM600 on a level surface, preferably close to you (within  
three feet).  
1. Turn on your iPod.  
2. Turn on the inMotion iM600 by pushing the  
button. The indicator light turns on.  
3. Press the SOURCE button until iPod” is displayed on  
the LCD screen.  
As s e m b l i n g t h e IN Mo t i o n IM 60 0  
Note: To avoid hearing a popping sound when you turn  
on your inMotion iM600, always turn on your audio  
source rst.  
Dock your iPod by sliding your iPod on top of the iM600  
docking station. If necessary, rst install the docking  
adapter that came with your iPod. While the docking  
adapter is not required for proper functioning of your  
iPod and iM600, it will provide a better fit.  
Po w e r O f f  
Turn off the inMotion iM600 by pushing the button.  
The indicator light shuts off.  
Note: Alternate audio sources—such as non-dockable  
iPod models, CD players, MP3 players, portable DVD  
players, and laptops—can also be connected to the  
inMotion iM600. For more information, see the  
Connecting to alternate audio sourcesection.  
Au t o Sh u t -d o w n  
During battery-only operation the inMotion iM600  
automatically shuts down if no audio is detected for  
Po w e r  
four minutes. Press the  
iM600 back on.  
button to turn the inMotion  
Use one of the following two options to power your  
inMotion iM600:  
NOTE: The Auto Shut-down feature is active during  
battery-only operation. If the AC wall adapter is used,  
the inMotion iM600 will remain on until the button  
is pushed and the indicator light shuts off.  
AC (Wall outlet) Pow er  
Insert the barrel connector from the power supply into  
the DC connector on the rear of the inMotion iM600.  
3
 
FM Ra d i o  
Co n n e c t i n g t o a l t e r n a t e a u d i o s o u r c e  
The inMotion iM600 features a built-in FM radio.  
The inMotion iM600 system includes an auxiliary input  
jack that allows you to connect to alternate audio  
sources, such as non-dockable iPod models, CD players,  
MP3 players, portable DVD players, and laptops. To  
connect the iM600 to an alternate audio source, follow  
the steps below.  
Activate the FM radio mode:  
Press the SOURCE button until FM” is displayed on the  
LCD screen.  
Scanning FM radio stations:  
Press and hold the  
or  
buttons to scan radio  
1. Locate a 3.5 mm stereo cable (sold separately).  
stations in an incremental manner.  
2. Connect one end of the 3.5 mm stereo cable into  
the auxiliary input jack (AUX) located on the back  
of the inMotion iM600 system, and the other end  
to the headphone or line out jack on your alternate  
audio device.  
Note: When the reception level of the FM station is  
strong enough for stereo reception, the FM stereo  
indicator on the LCD screen will illuminate.  
Programming FM radio stations:  
To program FM radio stations into the wireless remote,  
follow the steps below:  
3. Press the SOURCE button until AUX” is displayed on  
the LCD screen.  
1. Press the SOURCE button until FM” is displayed on  
the LCD screen.  
4. Set the volume on the audio source at mid-level.  
5. Set the volume on the inMotion iM600 at minimum  
level and adjust to a comfortable listening level.  
2. Use the  
be preset.  
and  
buttons to tune in the station to  
3. To program the station in the inMotion iM600  
memory, press and hold for 3 seconds one of the  
preset buttons [P1, P2, P3, P4] on the wireless  
remote. The LCD will display the preset number  
together with the word “SAVED” when a station has  
been successfully programmed.  
Vo l u m e  
The “+” and “buttons control the master volume.  
Press and hold the “+” button to increase the volume  
and the “button to decrease the volume.  
Once an FM radio station has been programmed, simply  
press the appropriate preset button [P1, P2, P3, P4] to  
select it.  
Fo r Ad d i t i o n a l Ba s s  
The inMotion iM600 is equipped with a subwoofer  
out jack (SUB OUT). This output should only be  
used to connect an Altec Lansing optional subwoofer  
specically designed to increase the bass output of this  
speaker system. Please check w w w.alteclansing.com for  
availability information.  
Note: To re-program a station in the inMotion iM600  
memory, simply repeat steps 1–3.  
Al a r m Cl o c k Fu n c t i o n  
The inMotion iM600 is compatible with your iPod  
devices alarm clock feature. To use your iPod and the  
inMotion iM600 as an alarm clock, follow the steps  
below:  
1. Activate the alarm clock feature on your iPod (for  
more information, consult your iPod users guide.)  
2. Dock your iPod in the inMotion iM600.  
3. Make sure the inMotion iM600 is plugged into a  
wall outlet.  
4. Turn on the inMotion iM600 by pushing the  
button. The indicator light turns on.  
5. Press the SOURCE button until iPod” is displayed on  
the LCD screen.  
6. Use the “+” and “buttons on the inMotion iM600  
to set the master volume.  
Note: For the alarm clock function to work properly, the  
inMotion iM600 must be plugged in to a wall outlet.  
The inMotion iM600 will otherwise automatically shut  
down if no audio is detected for four minutes.  
4
 
Tr o u b l e s h o o t i n g  
Sy m p t o m  
Po s s i b l e Pr o b l e m  
So l u t i o n  
The  
rechargeable  
battery  
The surge protector (if used) isnt  
powered on.  
If the power supply cord is plugged into a surge  
protector, make sure the surge protector is switched on.  
wont  
The wall outlet is not functioning.  
The power isnt turned on.  
Plug another device into the same wall outlet to  
confirm the outlet is working.  
charge and  
no power  
indicator  
light is  
Turn on the inMotion iM600 by pushing the  
The indicator light turns on.  
button.  
on (AC  
operation).  
No Power  
indicator  
light is on  
(Battery  
The rechargeable battery isnt  
charged.  
Recharge the battery (see the “Power” section for  
details.)  
The power isnt turned on.  
The volume is set too low.  
Turn on the inMotion iM600 by pushing the button.  
The indicator light turns on.  
operation).  
No sound is  
coming from  
speakers.  
The “+” and “buttons control the master volume.  
Press and hold the “+” button to increase the volume.  
Check the volume level on alternate audio source  
device and set at mid-level.  
An incorrect source has been selected.  
Press the SOURCE button until the appropriate source  
is displayed on the LCD screen.  
The iPod is not correctly seated into  
the docking station.  
Turn off the iPod, remove it from the docking station,  
reseat it, and turn it on again.  
If using an alternate audio source, the  
audio source is not properly connected  
to the inMotion iM600 or there is a  
problem with the alternate audio  
source.  
• Connect an alternate audio sourcesuch as a CD  
player, MP3 player, or portable DVD player—to your  
inMotion iM600 by plugging one end of a 3.5mm  
stereo cable (sold separately) to the line out of your  
portable device (if it has one) or to the devices  
headphone jack. Connect the other end to the input  
marked “AUX” on the back of the inMotion iM600.  
• Set the volume on the audio source at mid-level.  
• Set the volume on the inMotion iM600 at minimum  
level and adjust upward to a comfortable listening  
level.  
5
 
Sy m p t o m  
Po s s i b l e Pr o b l e m  
So l u t i o n  
There is a  
crackling  
sound  
The iPod is not correctly seated into  
the docking station.  
Turn off the iPod, remove it from the docking station,  
reseat it, and turn it on again.  
coming from  
speakers.  
If using an alternate audio source, the  
audio source is not properly connected  
to the inMotion iM600 or there is a  
problem with the alternate audio  
source.  
• Connect an alternate audio sourcesuch as a CD  
player, MP3 player, or portable DVD player—to your  
inMotion iM600 by plugging one end of a 3.5mm  
stereo cable (sold separately) to the line out of your  
portable device (if it has one) or to the devices  
headphone jack. Connect the other end to the input  
marked “AUX” on the back of the inMotion iM600.  
• Set the volume on the audio source at mid-level.  
• Set the volume on the inMotion iM600 at minimum  
level and adjust upward to a comfortable listening  
level.  
There is a  
crackling  
sound  
The operating systems volume level is  
set too high.  
Check the operating system volume level and decrease  
it if necessary.  
coming from  
speakers  
(when  
connected  
to PC or  
laptop).  
The sound  
is distorted.  
The inMotion iM600s volume level is  
set too high.  
The “+” and “buttons control the master volume.  
Press and hold the “–” button to decrease the volume.  
There is  
radio  
The unit is too close to a radio tower.  
Move the unit to see if the interference goes away.  
interference.  
Intermittent  
buzzing.  
The unit is located too close to a GSM  
cell phone.  
Move the GSM cell phone away from the unit.  
The  
inMotion  
iM600  
Static electricity, momentary  
interruption of power, or abnormal  
operating conditions may be  
responsible.  
1. Disconnect the power supply from the wall outlet.  
2. Disconnect the rechargeable battery per instructions  
in the “Power” section.  
exhibits  
3. Wait 20–30 seconds.  
erratic or  
unexpected  
behavior.  
Controls do  
not function.  
4. Reconnect the rechargeable battery.  
5. Reconnect the power supply.  
6
 
7
 
This Class B digital apparatus complies with Canadian ICES-003. • Cet appareillage digital de Classe B est conforme au ICES-003 canadien.  
Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod  
and has been certified by the developer to meet Apple performance standards.  
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.  
Patents pending.  
© 2007 Plantronics, Inc. All rights reserved.  
Altec, Altec Lansing, inMotion, the Altec Lansing inMotion logo, SFX, and the SFX logo are registered trademarks or trademarks of Altec Lansing.  
Plantronics, the logo design and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc.  
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.  
All other trademarks appearing herein are the property of their respective owners.  
Designed by Altec Lansing in the USA. Made in China.  
Co r po r a t e H e a d q u a r t e r s 535 Rte. 6 & 209, Milford, PA 18337-0277, USA • 866-570-5702 • 570-296-4434 • Fax 570-296-6887  
A12118 R07  
Designed in USA. Made in China  
 

Aastra Telecom Telephone 6757I User Manual
Acumen Automobile Parts SP500 User Manual
Aiphone Intercom System IS DVF 2RA User Manual
Airlink101 Switch AGIGA5SW User Manual
American Audio CD Player CDI 100 User Manual
Apple Network Cables HD 4870 User Manual
Atlona Saw AT VGA11S User Manual
Baby Trend Baby Accessories 1866CT User Manual
Barco Computer Monitor MD 4221 User Manual
Behringer Stereo Amplifier EPX2800 User Manual