American Standard Indoor Furnishings 0113404 User Manual

COLONY™ 24"  
PEDESTAL SINK  
VITREOUS CHINA  
COLONY™ 24" PEDESTAL SINK  
• Vitreous china lavatory and pedestal  
• Front overflow  
• Fitting ledge with generous shelf area  
• Supplied with mounting kit  
Shown with 2385.060 Reliant faucet  
(not included)  
0113.411 Faucet holes on 4" (102mm) centers  
(Illustrated)  
0113.811 Faucet holes on 8" (203mm) centers  
Nominal Dimensions:  
23-3/4" x 20" x 35-1/4"  
(603 x 508 x 895mm)  
20-3/4"  
(527mm)  
Separate Components:  
FINISHED  
3-3/4"  
5" (127mm) REF.  
PEDESTAL/WALL  
CLEARANCE  
WALL  
(95mm)  
4"  
(102mm)  
0113.404 Pedestal top 4" (102mm) centers  
0113.808 Pedestal top 8" (203mm) centers  
731100-400 Pedestal only  
5-1/2"  
(140mm)  
8"  
(203mm)  
PEDESTAL ANCHORING  
SCREW HOLES  
20"  
(508mm)  
Bowl sizes:  
3/8" (10mm) DIA.  
18-1/2" (470mm) wide  
12-1/2" (318mm) front to back  
5-1/2" (127mm) deep  
1-3/4" DIA.  
STD. DRAIN  
OUTLET  
PEDESTAL  
BASE  
23-3/4"  
(603mm)  
3/8" (10mm) DIA.  
ANCHOR SCREW  
HOLES ON  
Compliance Certifications -  
Meets or Exceeds the Following Specifications:  
• ASME A112.19.2M for Vitreous China Fixtures  
16"  
(406mm)  
1-1/4"  
(32mm)  
4-1/4"  
(108mm)  
S9 WALL-MT  
HANGER  
16" (406mm) CTRS  
DRAIN  
CHASE  
5-1/2"  
(140mm)  
8"  
(203mm)  
8" (203mm)  
5/16" (8mm) X 1-1/16" (27mm)  
ANCHOR SCREW HANGER  
MTG HOLES (2) ON  
To Be Specified:  
Color: White Bone Linen Silver  
Faucet:  
Faucet Finish:  
Supplies:  
1-1/4" Trap:  
4-1/2" (114mm) CTRS  
SUPPLIES AS  
REQUIRED  
35-1/4"  
(895mm)  
28-1/4"  
(718mm)  
23"  
1-1/4" O.D.  
WASTE  
1-1/4" O.D.  
TAILPIECE  
OPEN  
TO  
FLOOR  
*
21"  
*
(584mm)  
(533mm)  
ANCHOR SCREW  
HOLES (2) 3/8"  
(10mm) DIA. ON  
4-3/4" (121mm)  
CTRS  
FINISHED  
FLOOR  
8"  
(203mm)  
NOTES:  
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE  
*
SUGGESTED.  
PEDESTAL ANCHORING SCREWS NOT INCLUDED.  
SUITABLE FOR REINFORCEMENT ONLY, ACTUAL DIMENSIONS MUST  
BE TAKEN FROM FIXTURE.  
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.  
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.  
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.  
IMPORTANT: Dimensions of fixtures are nominal and may vary within the  
range of tolerances established by ANSI Standard A112.19.2.  
These measurements are subject to change or cancellation. No responsibility  
is assumed for use of superseded or voided pages.  
J14  
© 2008 AS America Inc.  
Revised 2/08  
 

Acer Network Card Altos R520 User Manual
Actron Automobile Accessories CP9110 User Manual
AEG Freezer 75248 GA3 User Manual
AEG Washer 60810 User Manual
Aiphone Home Theater System NH 1PA User Manual
Allied Telesis Network Card AT AR750S User Manual
Alpine Car Video System TMX R705 User Manual
Amana Range ART6000 User Manual
Audiovox Automobile Alarm CA 6552 User Manual
Audiovox Car Speaker SW 50 User Manual