Bang Olufsen Flat Panel Television Aug 40 User Manual

BeoVisionꢀ8-40ꢀ  
Guideꢀ  
 
Menu overview  
1.  
2.  
3.  
FREQUENCY  
CHANNEL NO  
NAME  
FINE TUNE  
DECODER  
TV SYSTEM  
SOUND  
AV1–AV6  
HDMI EXPANDER  
LINK TUNING  
TV TUNER  
DVB HD  
ADJUSTMENT  
SPEAKER TYPE  
SPEAKER DISTANCE  
SPEAKER LEVEL  
SOUND SYSTEM  
BRIGHTNESS  
CONTRAST  
COLOUR  
TINT  
SIZE  
HOR. SIZE  
VERT. SIZE  
HOR. POSITION  
VERT. POSITION  
GAME MODE  
MODE  
GROUP  
AFTER 1 HOUR  
AFTER 2 HOURS  
AFTER 4 HOURS  
OFF  
NAVIGATION BUTTON  
NO NAVIGATION BUTTON  
3
 
 
Navigate in menus  
Beo4 with navigation button  
If you have a Beo4 remote control with  
navigation button and your television is  
set up for use with it, see page 29, you  
use the centre button with up, down,  
left and right movement to navigate in  
menus. Press in the middle of the centre  
button to confirm selections and  
settings in menus.  
To back up through menus, press BACK.  
To exit menus, press and hold BACK.  
If your television is set up for use  
without navigation button, you must  
use the ‘star’ to navigate up, down, left  
and right in menus and press the centre  
button to confirm selections and  
settings in menus.  
Bring up the TV SETUP menu by pressing  
MENU while the TV is on.  
Beo4 without navigation button  
If you have a Beo4 remote control  
without navigation button, you must  
use the ‘star’ to navigate up, down, left  
and right in menus and press the centre  
button to confirm choices and settings  
in menus. Also your television must be  
set up for use with a Beo4 without  
navigation button.  
Bring up the TV SETUP menu by pressing  
MENU while the TV is on.  
To back up through menus, press STOP.  
To exit menus, press EXIT.  
GO  
Beo5  
If you operate your television with the  
Beo5 remote control, you use the centre  
button with up, down, left and right  
movement to navigate in menus. Press  
in the middle of the centre button to  
confirm selections and settings in menus.  
To back up through menus, press BACK.  
To exit menus, press and hold BACK.  
Note that a Beo5 should be re-configured  
when you add new products to your setup.  
Bring up the TV SETUP menu by pressing  
Menu while the TV is on.  
4
 
 
First-time setup  
Theꢀsetupꢀprocedureꢀisꢀactivatedꢀ  
whenꢀtheꢀtelevisionꢀisꢀconnectedꢀ  
toꢀtheꢀmainsꢀandꢀswitchedꢀonꢀforꢀ  
theꢀfirstꢀtime.ꢀYouꢀareꢀledꢀ  
The sequence of menus in first-time setup  
MENUꢀLANGUAGE …ꢀYouꢀcanꢀselectꢀtheꢀ  
languageꢀforꢀon-screenꢀmenus.ꢀTheꢀtextꢀ  
onꢀtheꢀscreenꢀchangesꢀasꢀyouꢀmoveꢀfromꢀ  
languageꢀtoꢀlanguage.ꢀ  
SPEAKERꢀTYPE …ꢀInꢀthisꢀmenu,ꢀyouꢀselectꢀ  
whichꢀspeakersꢀareꢀconnectedꢀtoꢀtheꢀ  
television,ꢀifꢀany.ꢀSeeꢀpage 19ꢀforꢀfurtherꢀ  
throughꢀanꢀautomaticꢀseriesꢀofꢀ  
on-screenꢀmenusꢀinꢀwhichꢀyouꢀ  
mustꢀregisterꢀtheꢀextraꢀ  
TUNERꢀSETUPꢀ…ꢀDisableꢀtheꢀtelevisionꢀtunerꢀ SPEAKERꢀDISTANCE …ꢀInꢀthisꢀmenu,ꢀyouꢀ  
orꢀDVBꢀtuner,ꢀifꢀyouꢀlike,ꢀseeꢀpage 7.  
CONNECTIONSꢀ…ꢀSelectꢀtheꢀtypeꢀofꢀ  
equipmentꢀyouꢀhaveꢀconnectedꢀtoꢀeachꢀ  
socketꢀgroups,ꢀtheꢀsocketsꢀused,ꢀtheꢀ  
productꢀname,ꢀandꢀtheꢀsourceꢀname.ꢀꢀ  
Forꢀfurtherꢀinformationꢀaboutꢀtheꢀ  
CONNECTIONSꢀmenu,ꢀseeꢀpage 8.ꢀ  
CHECKꢀAERIALꢀCONNECTION …ꢀThisꢀ  
promptꢀonlyꢀappears,ꢀifꢀtheꢀtelevisionꢀ  
tunerꢀisꢀenabled.ꢀ  
selectꢀtheꢀdistanceꢀinꢀmetresꢀtoꢀeachꢀofꢀ  
theꢀspeakersꢀinꢀyourꢀsetup.ꢀ  
equipmentꢀyouꢀhaveꢀconnected,ꢀ  
suchꢀasꢀloudspeakers.ꢀ  
SPEAKERꢀLEVEL …ꢀInꢀthisꢀmenu,ꢀyouꢀcanꢀ  
adjustꢀtheꢀvolumeꢀlevelꢀofꢀeachꢀspeakerꢀinꢀ  
yourꢀsetup.ꢀ  
Ifꢀyouꢀchangeꢀyourꢀsetupꢀatꢀaꢀlaterꢀ  
date,ꢀyouꢀcanꢀaccessꢀtheꢀsameꢀ  
menusꢀandꢀupdateꢀyourꢀsettings.ꢀ  
Rememberꢀthatꢀyouꢀneedꢀtoꢀsetꢀ  
theꢀspeakerꢀtypesꢀandꢀtheꢀ  
ADJUSTMENT …ꢀInꢀthisꢀmenu,ꢀyouꢀcanꢀ  
adjustꢀbass,ꢀvolume,ꢀtreble,ꢀetc.ꢀ  
DVBꢀSETUP …ꢀIfꢀtheꢀDVBꢀHDꢀtunerꢀisꢀ  
enabled,ꢀtheꢀDVBꢀSETUPꢀmenuꢀappears,ꢀ  
seeꢀtheꢀseparateꢀDVBꢀHDꢀGuideꢀforꢀfurtherꢀ  
information.ꢀ  
AUTOꢀTUNINGꢀ…ꢀWhenꢀyouꢀhaveꢀregisteredꢀ  
yourꢀconnectedꢀequipment,ꢀaꢀmenuꢀforꢀ  
channelꢀtuningꢀautomaticallyꢀappearsꢀonꢀ  
theꢀscreen.ꢀUseꢀtheꢀnavigationꢀbuttonꢀ  
rightꢀtoꢀstartꢀautoꢀtuning.ꢀTheꢀtelevisionꢀ  
findsꢀallꢀavailableꢀchannels.ꢀForꢀfurtherꢀ  
informationꢀaboutꢀtuningꢀTVꢀchannels,ꢀꢀ  
distancesꢀinꢀtheꢀSOUNDꢀmenu.ꢀ  
For information about where to connect  
extra equipment, see the chapter about  
connection panels in Getting Started.  
5
 
 
Choose menu language  
You can select the language for on-  
screen menus via the TV SETUP menu.  
The text on the screen changes as you  
move from language to language.  
Theꢀmenuꢀlanguageꢀyouꢀchooseꢀ  
duringꢀtheꢀfirst-timeꢀsetupꢀofꢀ  
yourꢀtelevisionꢀcanꢀbeꢀchangedꢀ  
atꢀanyꢀtime.ꢀ  
MENU LANGUAGE  
DANSK  
DEUTSCH  
ENGLISH  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ  
OPTIONS.ꢀ  
ESPAÑOL  
FRANÇAIS  
ITALIANO  
NEDERLANDS  
SVENSKA  
Onceꢀaꢀmenuꢀlanguageꢀisꢀchosen,ꢀ  
allꢀmenusꢀandꢀdisplayꢀmessagesꢀ  
areꢀshownꢀinꢀthisꢀlanguage.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀMENUꢀ  
LANGUAGE.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
MENUꢀLANGUAGEꢀmenu.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ  
moveꢀtoꢀyourꢀlanguageꢀchoice.ꢀ  
>Pressꢀtheꢀcentreꢀbutton toꢀmakeꢀyourꢀ  
choice.ꢀ  
>PressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀpreviousꢀ  
menusꢀorꢀpressꢀandꢀholdꢀBACK toꢀleaveꢀ  
theꢀmenus.ꢀ  
6
 
 
Tuner setup  
To disable the internal tuner …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ  
OPTIONS.ꢀ  
IfꢀyouꢀdisableꢀtheꢀTVꢀtuner,ꢀyouꢀ  
canꢀactivateꢀtheꢀoptionalꢀDVBꢀ  
tunerꢀwithꢀtheꢀTVꢀbutton.ꢀIfꢀyouꢀ  
disableꢀtheꢀDVBꢀtuner,ꢀyouꢀcanꢀ  
activateꢀaꢀconnectedꢀperipheralꢀ  
unitꢀwithꢀtheꢀDTVꢀbutton.ꢀ  
TUNER SETUP  
TV TUNER  
DVB HD  
ON  
ON  
>Pressꢀtheꢀcentreꢀbutton toꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenu,ꢀandꢀhighlightꢀTUNERꢀ  
SETUP.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
TUNERꢀSETUPꢀmenuꢀandꢀhighlightꢀTVꢀ  
TUNER.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
switchꢀbetweenꢀtheꢀsettingꢀONꢀorꢀOFF.ꢀ  
>HighlightꢀDVBꢀHD.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
switchꢀbetweenꢀtheꢀsettingꢀONꢀorꢀOFF.ꢀ  
>Pressꢀtheꢀcentreꢀbutton toꢀstoreꢀtheꢀ  
settings,ꢀorꢀ…ꢀ  
>ꢀpressꢀandꢀholdꢀBACK toꢀleaveꢀtheꢀ  
menusꢀwithoutꢀstoring.ꢀ  
7
 
 
Connections  
Theꢀconnectionꢀpanelꢀonꢀyourꢀ  
televisionꢀallowsꢀyouꢀtoꢀconnectꢀ  
signalꢀinputꢀcablesꢀasꢀwellꢀasꢀaꢀ  
varietyꢀofꢀextraꢀequipment,ꢀsuchꢀ  
asꢀaꢀvideoꢀrecorder.ꢀ  
POWER LINK  
SUB  
DVB  
POWER LINK  
FRONT  
Ifꢀyourꢀtelevisionꢀisꢀequippedꢀ  
withꢀtheꢀoptionalꢀSystemꢀModuleꢀ  
andꢀyouꢀconnectꢀaꢀcompatibleꢀ  
audioꢀsystem,ꢀyouꢀobtainꢀtheꢀ  
benefitsꢀofꢀanꢀintegratedꢀaudio/  
videoꢀsystemꢀusingꢀaꢀMasterꢀLinkꢀ  
cable.  
AERIAL  
POWER LINK  
REAR  
Thereꢀareꢀsomeꢀrestrictionsꢀasꢀtoꢀtheꢀtypesꢀofꢀ  
equipmentꢀthatꢀcanꢀbeꢀconnectedꢀtoꢀtheꢀ  
sockets.ꢀ  
AV 1–2  
AV 1–4  
AV 1–4  
AV 4  
Decoder  
DVD  
Anyꢀequipmentꢀyouꢀconnectꢀtoꢀ  
theseꢀsocketsꢀmustꢀbeꢀregisteredꢀ  
inꢀtheꢀCONNECTIONSꢀmenu.ꢀForꢀ  
EquipmentꢀwithꢀVGAꢀoutputꢀcanꢀonlyꢀbeꢀ  
connectedꢀandꢀregisteredꢀtoꢀtheꢀAV3ꢀsocket.ꢀ  
Satellite (STB)  
Recorder (HDR)  
Before you connect any equipment  
to your television, remember to  
disconnect the television from the  
mains.  
8
 
 
>> Connections  
IR type  
In the AV menus you can select how a  
PUC controlled product is connected.  
You can choose between ‘PLUG’ (cable)  
and ‘IR’ (IR Blaster).  
IR-transmitters: To operate non-Bang &  
Olufsen products with a Bang & Olufsen  
remote control, attach a Bang & Olufsen IR-  
transmitter to each of the products. Connect  
each transmitter to the corresponding socket  
marked PUC on the main connection panel.  
PLUG  
STB  
STB  
IR  
DVB module  
The CA module is a ‘card reader’ for your  
Smart Card which decodes the coded  
signals sent out by the programme  
provider.  
Insert the Smart Card in the CA module with  
the chip facing towards the television. The  
CA module has one protruding edge on one  
side and two protuding edges on the other  
side. The side with one edge should face  
upwards. The Conax Smart Card must be  
inserted with the chip facing away from the  
television front.  
9
 
>> Connections  
Connect and use a PC  
Bring up the computer image on the  
screen  
IMPORTANT! Before connecting a PC to  
the television, disconnect the television,  
the computer, and all equipment  
connected to the computer from the  
mains.  
Toꢀseeꢀtheꢀcomputerꢀpictureꢀonꢀtheꢀscreen,ꢀ  
youꢀmustꢀbringꢀitꢀupꢀwithꢀyourꢀremoteꢀ  
control.ꢀ  
To bring up the computer picture …  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀPCꢀinꢀtheꢀBeo4ꢀ  
displayꢀandꢀpressꢀtheꢀcentreꢀbuttonꢀtoꢀ  
bringꢀupꢀtheꢀpicture.ꢀYouꢀcanꢀthenꢀoperateꢀ  
theꢀcomputerꢀasꢀyouꢀnormallyꢀwould.ꢀ  
(Beo5:ꢀPressꢀPc).ꢀ  
To connect a computer to the  
television …  
>Usingꢀtheꢀappropriateꢀtypeꢀofꢀcable,ꢀ  
connectꢀoneꢀendꢀtoꢀtheꢀDVI,ꢀVGAꢀorꢀHDMIꢀ  
outputꢀsocketꢀonꢀyourꢀcomputer,ꢀandꢀtheꢀ  
otherꢀendꢀtoꢀtheꢀVGAꢀorꢀHDMIꢀsocketꢀonꢀ  
theꢀtelevision.ꢀ  
>Toꢀhearꢀsoundꢀfromꢀtheꢀcomputerꢀinꢀtheꢀ  
speakersꢀconnectedꢀtoꢀtheꢀtelevision,ꢀuseꢀ  
theꢀappropriateꢀcableꢀandꢀconnectꢀtheꢀ  
soundꢀoutputꢀonꢀtheꢀcomputerꢀtoꢀtheꢀR–Lꢀ  
orꢀSPDIFꢀsocketsꢀonꢀtheꢀtelevisionꢀwhenꢀ  
appropriate.ꢀ  
>Reconnectꢀtheꢀtelevision,ꢀtheꢀcomputer,ꢀ  
andꢀallꢀequipmentꢀconnectedꢀtoꢀtheꢀ  
computerꢀtoꢀtheꢀmains.ꢀRemember,ꢀtheꢀ  
computerꢀmustꢀbeꢀconnectedꢀtoꢀaꢀ  
groundedꢀwallꢀoutletꢀasꢀspecifiedꢀinꢀitsꢀ  
setting-upꢀinstructions.ꢀ  
If you have connected your PC to the VGA  
socket on the television, you must register  
the PC to the AV3 socket in the  
CONNECTIONS menu. A PC connected to  
the HDMI socket can be registered to any of  
the AV sockets or socket groups.  
10  
 
Register additional video equipment  
Ifꢀyouꢀconnectꢀadditionalꢀvideoꢀ  
equipmentꢀtoꢀyourꢀtelevision,ꢀ  
youꢀmustꢀregisterꢀtheꢀequipmentꢀ  
inꢀtheꢀCONNECTIONSꢀmenu.ꢀ  
What is connected?  
Registering the equipment connected  
CONNECTIONS  
to the television enables you to operate  
it with your remote control.  
AV1  
AV2  
AV3  
AV4  
AV5  
AV6  
NONE  
NONE  
NONE  
NONE  
CAMERA  
NONE  
NO  
Whenꢀtheꢀtelevisionꢀisꢀfirstꢀsetꢀ  
up,ꢀsomeꢀofꢀtheꢀequipmentꢀ  
connectedꢀatꢀthatꢀparticularꢀ  
momentꢀisꢀdetectedꢀbyꢀtheꢀ  
television.ꢀTheꢀCONNECTIONSꢀ  
menuꢀappearsꢀautomaticallyꢀonꢀ  
theꢀscreenꢀduringꢀfirst-timeꢀ  
setupꢀforꢀyouꢀtoꢀregisterꢀ  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀ  
highlightꢀOPTIONS.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenu.ꢀCONNECTIONSꢀisꢀ  
highlightedꢀalready.ꢀ  
HDMI EXPANDER  
HDMI MATRIX  
LINK TUNING  
NO  
NO  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
CONNECTIONSꢀmenu.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ  
stepꢀbetweenꢀtheꢀdifferentꢀsocketꢀgroups:ꢀ  
connectedꢀequipment,ꢀifꢀitꢀisꢀnotꢀ  
detectedꢀautomaticallyꢀbyꢀtheꢀ  
television.ꢀIfꢀyouꢀconnectꢀ  
AV1,ꢀAV2,ꢀAV3,ꢀAV4,ꢀAV5,ꢀAV6ꢀandꢀHDMIꢀ The available sockets may vary according to  
EXPANDER,ꢀHDMIꢀMATRIXꢀwhenꢀ  
your setup.  
>Namesꢀareꢀshownꢀinꢀtheꢀtelevisionꢀon-  
screenꢀdisplayꢀwhenꢀtheꢀsourceꢀisꢀselected.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
STANDBYꢀOPTIONSꢀmenu.ꢀ  
equipmentꢀatꢀaꢀlaterꢀdate,ꢀyouꢀ  
mustꢀregisterꢀthisꢀequipmentꢀinꢀ  
theꢀCONNECTIONSꢀmenu.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbeꢀableꢀtoꢀ  
registerꢀaꢀconnectedꢀproductꢀtypeꢀtoꢀtheꢀ  
highlightedꢀsocketꢀgroup.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀandꢀdownꢀ  
toꢀmoveꢀbetweenꢀtheꢀsocketsꢀinꢀtheꢀ  
group.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ  
seeꢀtheꢀlistꢀofꢀstandbyꢀoptionsꢀforꢀwhenꢀ  
theꢀconnectedꢀequipmentꢀshouldꢀswitchꢀ  
toꢀstandby.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
registerꢀwhatꢀyouꢀhaveꢀconnectedꢀtoꢀtheꢀ  
highlightedꢀsocket.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀselectꢀaꢀ  
standbyꢀoption.ꢀ  
>Pressꢀtheꢀcentreꢀbutton toꢀbeꢀableꢀtoꢀ  
selectꢀtheꢀproductꢀfromꢀanꢀon-screenꢀlist.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
seeꢀlistsꢀforꢀotherꢀtypesꢀofꢀproducts.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀorꢀ  
aꢀnumberꢀbuttonꢀtoꢀhighlightꢀtheꢀnameꢀofꢀ  
theꢀproductꢀandꢀpressꢀtheꢀcentreꢀbuttonꢀ  
toꢀregisterꢀit.ꢀ  
>Whenꢀyouꢀhaveꢀcompletedꢀyourꢀsettingsꢀ  
forꢀaꢀsingleꢀsocketꢀgroup,ꢀpressꢀtheꢀ  
centreꢀbuttonꢀtoꢀreturnꢀtoꢀtheꢀ  
CONNECTIONSꢀmenu.ꢀ  
>Repeatꢀtheꢀprocedureꢀforꢀeachꢀsocketꢀ  
group.ꢀ  
At first-time setup only, when you have  
registered all connected equipment, press  
the green button to store the setup.  
>Pressꢀtheꢀgreenꢀbuttonꢀtoꢀbeꢀableꢀtoꢀ  
nameꢀtheꢀsource.ꢀTheꢀnamingꢀmenuꢀisꢀ  
nowꢀactivated.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀandꢀdownꢀ  
toꢀfindꢀtheꢀindividualꢀcharactersꢀinꢀtheꢀ  
name.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀacceptꢀtheꢀname.ꢀ  
11  
 
 
>> Register additional video equipment  
What’s on the AV1 – AV6 menu …  
SOURCEꢀ…ꢀSelectꢀtheꢀsourceꢀyouꢀhaveꢀ  
connected.ꢀTheꢀoptionꢀyouꢀselectꢀindicatesꢀ  
whichꢀremoteꢀcontrolꢀbuttonꢀswitchesꢀonꢀ  
theꢀsource.ꢀForꢀexample,ꢀaꢀsourceꢀ  
HDMIꢀ…ꢀIndicatesꢀwhetherꢀorꢀnotꢀtheꢀ  
equipmentꢀisꢀconnectedꢀtoꢀtheꢀtelevisionꢀ  
viaꢀoneꢀofꢀtheꢀHDMIꢀsockets.ꢀSelectꢀtheꢀ  
appropriateꢀsocket:ꢀA,ꢀB,ꢀorꢀC.ꢀ  
AV2  
SOURCE  
NAME  
IR SOCKET  
IR TYPE  
HDMI  
NONE  
. . . . .  
NONE  
IR  
NONE  
NO  
ꢀ(YPbPr)ꢀ…ꢀIndicatesꢀwhetherꢀorꢀnotꢀtheꢀ  
equipmentꢀisꢀconnectedꢀtoꢀtheꢀtelevisionꢀ  
viaꢀtheꢀYPbPrꢀsockets.ꢀOptionsꢀareꢀYESꢀ  
andꢀNO.ꢀCanꢀonlyꢀbeꢀregisteredꢀinꢀoneꢀofꢀ  
theꢀAVꢀmenusꢀ(AV2-AV4ꢀorꢀAV6)ꢀatꢀanyꢀ  
time.ꢀ  
registeredꢀasꢀV.MEMꢀisꢀswitchedꢀonꢀwhenꢀ  
youꢀpressꢀtheꢀVMEM button.ꢀAꢀsourceꢀ  
registeredꢀasꢀDTV2ꢀisꢀswitchedꢀonꢀbyꢀ  
pressingꢀLISTꢀandꢀthenꢀtheꢀnavigationꢀ  
buttonꢀupꢀorꢀdownꢀtoꢀdisplayꢀDTV2ꢀandꢀ  
pressꢀtheꢀcentreꢀbutton.ꢀ(Beo5:ꢀPressꢀ  
DTV2).ꢀOptionsꢀare:ꢀ  
Y/Pb/Pr  
S/P-DIF  
NONE  
(VGA)ꢀ…ꢀIndicatesꢀwhetherꢀorꢀnotꢀtheꢀ  
equipmentꢀisꢀconnectedꢀtoꢀtheꢀtelevisionꢀ  
viaꢀtheꢀVGAꢀsocket.ꢀOptionsꢀareꢀYESꢀandꢀ  
NO.ꢀ  
NONEꢀ…ꢀifꢀnothingꢀisꢀconnected.ꢀ  
V.MEMꢀ…ꢀforꢀaꢀconnectedꢀvideoꢀrecorderꢀ  
orꢀhardꢀdiskꢀrecorder.ꢀ  
Regarding High Definition (HD)  
sources …  
S/P-DIF …ꢀSelectꢀtheꢀS/P-DIFꢀconnectionꢀ  
used.ꢀOptionsꢀareꢀ1,ꢀ2ꢀandꢀNONE.ꢀ  
DVD/DVD2ꢀ…ꢀforꢀaꢀconnectedꢀDVDꢀplayerꢀ  
orꢀrecorder.  
StandardꢀDefinitionꢀ(SD)ꢀsignalsꢀcanꢀbeꢀ  
recorded,ꢀasꢀwellꢀasꢀdistributedꢀtoꢀaꢀlinkꢀ  
roomꢀtelevision,ꢀbutꢀHDꢀsignalsꢀcannot.ꢀ  
DTV2…ꢀforꢀotherꢀequipment,ꢀsuchꢀasꢀaꢀ  
set-topꢀbox.  
AnꢀHDMIꢀExpanderꢀmustꢀalwaysꢀbeꢀ  
connectedꢀtoꢀHDMI C,ꢀwhenꢀpresent,ꢀ  
otherwiseꢀtoꢀHDMI B.ꢀWhenꢀconnectingꢀanꢀ  
HDMIꢀExpander,ꢀadditionalꢀHDMIꢀsocketsꢀ  
ꢀꢀ DTVꢀ…ꢀoccupiedꢀbyꢀtheꢀDVBꢀmodule,ꢀ  
unlessꢀyouꢀdisableꢀtheꢀDVBꢀmodule.  
ConnectꢀbothꢀtheꢀHDꢀandꢀtheꢀSDꢀsignalsꢀtoꢀ  
theꢀtelevision.ꢀTheꢀbestꢀsignalꢀisꢀalwaysꢀused.ꢀ  
IfꢀnoꢀHDꢀsignalꢀisꢀavailable,ꢀtheꢀSDꢀsignalꢀisꢀ  
shown.ꢀ  
V.AUX2ꢀ…ꢀforꢀotherꢀequipment,ꢀsuchꢀasꢀaꢀ becomeꢀavailable;ꢀC1,ꢀC2,ꢀC3ꢀandꢀC4.ꢀ  
videoꢀgameꢀconsole.ꢀ  
TVꢀ…ꢀoccupiedꢀbyꢀtheꢀTVꢀtuner,ꢀunlessꢀ  
youꢀdisableꢀbothꢀtunersꢀinꢀtheꢀTUNERꢀ  
SETUPꢀmenu.  
Whileꢀitꢀisꢀpossibleꢀtoꢀregisterꢀequipmentꢀ  
underꢀanyꢀofꢀtheꢀavailableꢀsourceꢀtypes,ꢀtheꢀ  
typeꢀyouꢀselectꢀaffectsꢀhowꢀyouꢀcanꢀuseꢀyourꢀ  
source.ꢀ  
PCꢀ…ꢀforꢀaꢀconnectedꢀPC.  
DECODER …ꢀforꢀaꢀconnectedꢀdecoder.ꢀꢀ  
Theꢀsourceꢀlistsꢀareꢀdividedꢀintoꢀ4ꢀgroups;  
‘stb’ꢀareꢀset-topꢀboxes,ꢀ‘dvd’ꢀareꢀDVDꢀ  
playersꢀandꢀrecorders,ꢀ‘vmem’ꢀareꢀvideoꢀ  
recordersꢀincludingꢀhardꢀdiskꢀrecorders,ꢀ  
‘other’ꢀare,ꢀforꢀexample,ꢀPCsꢀandꢀmediaꢀ  
centres.  
NAMEꢀ…ꢀAllowsꢀyouꢀtoꢀnameꢀtheꢀsourceꢀ  
youꢀareꢀregistering,ꢀtheꢀnameꢀyouꢀenterꢀ  
appearsꢀinꢀtheꢀon-screenꢀdisplayꢀwhenꢀyouꢀ  
activateꢀtheꢀsource.ꢀ  
(AUTOꢀSELECTION) …ꢀAllowsꢀaꢀsourceꢀ  
connectedꢀtoꢀAV5ꢀtoꢀbeꢀselectedꢀ  
automaticallyꢀasꢀsoonꢀasꢀtheꢀtelevisionꢀ  
detectsꢀaꢀsignal,ꢀprovidedꢀtheꢀtelevisionꢀisꢀ  
onꢀatꢀtheꢀtime.ꢀOptionsꢀareꢀONꢀandꢀOFF.ꢀ  
IRꢀSOCKET …ꢀSelectꢀwhichꢀIRꢀsocketꢀisꢀusedꢀ  
forꢀtheꢀsource,ꢀoptionsꢀareꢀPUC1,ꢀPUC2,ꢀ  
PUC3,ꢀPUC4ꢀandꢀNONE.  
IRꢀTYPE …ꢀSelectꢀtheꢀtypeꢀofꢀIRꢀconnectionꢀ  
used.ꢀOptionsꢀareꢀPLUGꢀ(forꢀaꢀcableꢀ  
connection)ꢀandꢀIRꢀ(forꢀanꢀIRꢀblasterꢀ  
connection).  
12  
 
 
>> Register additional video equipment  
Standby settings …  
Whenꢀyouꢀregisterꢀaꢀnon-Bang &ꢀOlufsenꢀ  
productꢀinꢀtheꢀCONNECTIONSꢀmenu,ꢀyouꢀ  
canꢀalsoꢀselectꢀdifferentꢀ‘STANDBYꢀ  
OPTIONS’ꢀforꢀyourꢀproduct.ꢀThisꢀmeansꢀthatꢀ  
youꢀcanꢀselectꢀifꢀtheꢀconnectedꢀproductꢀ  
shouldꢀswitchꢀtoꢀstandbyꢀautomatically.ꢀ  
The options are:  
OFFꢀATꢀSOURCEꢀCHANGEꢀ…ꢀTheꢀproductꢀ  
switchesꢀtoꢀstandbyꢀimmediatelyꢀwhenꢀ  
youꢀselectꢀanotherꢀsource.ꢀ  
OFFꢀATꢀTVꢀSTANDBYꢀ…ꢀTheꢀproductꢀ  
switchesꢀtoꢀstandbyꢀwhenꢀyouꢀswitchꢀtheꢀ  
televisionꢀtoꢀstandby.ꢀ  
ALWAYSꢀONꢀ…ꢀTheꢀproductꢀdoesꢀnotꢀswitchꢀ  
toꢀstandbyꢀautomatically.ꢀ  
MANUALꢀCONTROLꢀ…ꢀTheꢀproductꢀcanꢀbeꢀ  
switchedꢀonꢀandꢀoffꢀbyꢀmeansꢀofꢀtheꢀ  
remoteꢀcontrol.  
13  
 
Camera and headphones sockets  
Youꢀcanꢀconnectꢀheadphonesꢀ  
andꢀlistenꢀtoꢀaꢀprogramme,ꢀorꢀ  
youꢀcanꢀconnectꢀaꢀCamcorderꢀ  
andꢀwatchꢀyourꢀhomeꢀmoviesꢀonꢀ  
theꢀtelevision.ꢀ  
Sockets for temporary connections  
PHONES  
Youꢀcanꢀconnectꢀstereoꢀheadphonesꢀtoꢀtheꢀ  
socketꢀmarkedꢀPHONES.ꢀ  
PHONES  
–ꢀ Whenꢀtheꢀsoundꢀinꢀtheꢀspeakersꢀisꢀnotꢀ  
R
muted,ꢀvolumeꢀadjustmentꢀisꢀdirectedꢀatꢀ  
L
theꢀspeakers.ꢀ  
VIDEO  
–ꢀ Toꢀmuteꢀtheꢀspeakersꢀconnectedꢀtoꢀtheꢀ  
television,ꢀpressꢀtheꢀmiddleꢀofꢀtheꢀ  
button.ꢀ  
–ꢀ Whenꢀsoundꢀisꢀmutedꢀinꢀtheꢀspeakers,ꢀ  
pressꢀ ꢀorꢀ ꢀtoꢀadjustꢀsoundꢀinꢀ  
headphones.ꢀ  
–ꢀ Toꢀrestoreꢀsoundꢀinꢀtheꢀspeakers,ꢀpressꢀtheꢀ  
middleꢀofꢀtheꢀ  
ꢀbutton.ꢀ  
Note: Prolonged listening at high volume  
levels can cause hearing damage!  
R – L  
Forꢀaudioꢀconnectionꢀ(rightꢀandꢀleftꢀsoundꢀ  
channelꢀrespectively).ꢀ  
VIDEO  
Forꢀconnectionꢀofꢀtheꢀvideoꢀsignal.ꢀ  
Watch digital pictures on your television  
Toꢀwatchꢀyourꢀcameraꢀpictures,ꢀconnectꢀtheꢀ  
cameraꢀtoꢀtheꢀAV5ꢀsocket(s)ꢀandꢀswitchꢀtheꢀ  
televisionꢀon.ꢀTheꢀtelevisionꢀautomaticallyꢀ  
registersꢀtheꢀsignalꢀandꢀyouꢀcanꢀseeꢀtheꢀstillꢀ  
picturesꢀonꢀtheꢀscreen.ꢀ  
If the signal from the camera is switched  
off …  
>PressꢀLIST repeatedlyꢀtoꢀdisplayꢀCAMERA*ꢀ  
onꢀBeo4ꢀandꢀpressꢀtheꢀcentreꢀbutton.  
(Beo5:ꢀPressꢀCamera).ꢀ  
*In order to display CAMERA on Beo4, you  
must first add it to the Beo4 list of functions.  
For further information, see the Guide  
enclosed with Beo4.  
14  
 
 
Edit tuned TV channels  
Ifꢀautomaticꢀtuningꢀofꢀallꢀ  
Move, name or delete tuned TV channels  
channelsꢀhasꢀnotꢀstoredꢀtheꢀ  
channelsꢀonꢀyourꢀpreferredꢀ  
channelꢀnumbersꢀorꢀhasꢀnotꢀ  
namedꢀallꢀtheꢀstoredꢀchannelsꢀ  
automatically,ꢀyouꢀcanꢀrearrangeꢀ  
theꢀorderꢀinꢀwhichꢀtheꢀchannelsꢀ  
appearꢀandꢀprovideꢀthemꢀwithꢀaꢀ  
nameꢀofꢀyourꢀownꢀchoice.ꢀ  
Once automatic tuning of channels has  
been completed, the EDIT CHANNELS  
menu appears automatically and you  
can move or name the TV channels that  
have been tuned in. You can also delete  
any tuned TV channel you do not want.  
Move tuned TV channels …  
>InꢀtheꢀEDITꢀCHANNELSꢀmenu,ꢀhighlightꢀ  
theꢀchannelꢀyouꢀwishꢀtoꢀmove.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀrightꢀtoꢀmoveꢀ  
theꢀchannelꢀoutꢀofꢀtheꢀlist.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ  
moveꢀtheꢀchannelꢀtoꢀtheꢀdesiredꢀchannelꢀ  
number.ꢀ  
Enter the EDIT CHANNELS menu …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ >ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀtoꢀmoveꢀtheꢀ  
TUNING.ꢀ  
channelꢀbackꢀintoꢀtheꢀlistꢀorꢀchangeꢀplacesꢀ  
withꢀtheꢀchannelꢀwhichꢀoccupiesꢀtheꢀ  
desiredꢀchannelꢀnumber.ꢀ  
Ifꢀtheꢀtunedꢀchannelsꢀrequireꢀ  
additionalꢀediting,ꢀsuchꢀasꢀfineꢀ  
tuning,ꢀuseꢀtheꢀMANUALꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
TUNINGꢀmenuꢀandꢀhighlightꢀEDITꢀ  
CHANNELS.ꢀ  
>Now,ꢀmoveꢀtheꢀchannelꢀwithꢀwhichꢀyouꢀ  
haveꢀchangedꢀplacesꢀtoꢀanꢀemptyꢀchannelꢀ  
numberꢀorꢀtoꢀaꢀnumberꢀalreadyꢀoccupiedꢀ  
andꢀrepeatꢀtheꢀprocedure.ꢀ  
TUNINGꢀmenu,ꢀseeꢀpage 17.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
EDITꢀCHANNELSꢀmenu.ꢀ  
For tuning of digital channel, see the  
Guide for your DVB module.  
>Whenꢀyouꢀhaveꢀmovedꢀtheꢀrelevantꢀ  
channels,ꢀpressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀ  
menus,ꢀorꢀpressꢀandꢀholdꢀBACKꢀtoꢀexitꢀallꢀ  
menus.ꢀ  
15  
 
 
>> Edit tuned TV channels  
Delete tuned channels …  
Name tuned channels …  
EDIT CHANNELS  
1
2 TV 2  
>InꢀtheꢀEDITꢀCHANNELSꢀmenuꢀhighlightꢀtheꢀ >ꢀInꢀtheꢀEDITꢀCHANNELSꢀmenuꢀhighlightꢀtheꢀ  
channelꢀyouꢀwishꢀtoꢀname.  
channelꢀyouꢀwishꢀtoꢀdelete.  
>Useꢀtheꢀnavigationꢀbuttonꢀrightꢀtoꢀmoveꢀ  
theꢀchannelꢀoutꢀofꢀtheꢀlist.ꢀ  
>Pressꢀtheꢀgreenꢀbuttonꢀtoꢀbeꢀableꢀtoꢀ  
nameꢀtheꢀchannel.ꢀTheꢀnamingꢀmenuꢀisꢀ  
nowꢀactivated.ꢀ  
3
. . . . .  
4
BBC 1  
>Pressꢀtheꢀyellowꢀbuttonꢀtoꢀbeꢀableꢀtoꢀ  
deleteꢀtheꢀchannel.ꢀ  
5
6
EUROSPORT  
TV 4  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀandꢀdownꢀtoꢀ  
findꢀtheꢀindividualꢀcharactersꢀinꢀtheꢀname.  
>Moveꢀbetweenꢀcharacterꢀplacesꢀwithꢀtheꢀ  
navigationꢀbuttonꢀleftꢀandꢀright.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀname.ꢀ  
>Ifꢀnecessary,ꢀrepeatꢀtheꢀprocedureꢀandꢀ  
nameꢀotherꢀchannelꢀnumbers.ꢀ  
7
ZDF  
>Pressꢀtheꢀyellowꢀbuttonꢀagainꢀtoꢀconfirmꢀ  
theꢀdeletion,ꢀorꢀpressꢀtheꢀnavigationꢀ  
buttonꢀleftꢀtwiceꢀtoꢀmoveꢀtheꢀchannelꢀ  
backꢀintoꢀtheꢀlist.ꢀ  
8
. . . . .  
9
DISCOVER  
10  
>Whenꢀyouꢀhaveꢀdeletedꢀtheꢀrelevantꢀ  
channels,ꢀpressꢀandꢀholdꢀBACK toꢀexitꢀallꢀ  
menus.ꢀ  
Move a channel.  
>Whenꢀyouꢀhaveꢀnamedꢀtheꢀrelevantꢀ  
channels,ꢀpressꢀtheꢀcentreꢀbuttonꢀtoꢀ  
acceptꢀyourꢀeditedꢀlist,ꢀorꢀpressꢀandꢀholdꢀ  
BACK toꢀexitꢀallꢀmenusꢀwithoutꢀstoring.ꢀ  
EDIT CHANNELS  
1
2
TV 2  
3
4
A . . . .  
BBC 1  
5
6
EUROSPORT  
TV 4  
7
ZDF  
8
. . . . .  
9
DISCOVER  
10  
Name a channel.  
EDIT CHANNELS  
1
2
TV 2  
3
. . . . .  
4
BBC 1  
5
6
EUROSPORT  
TV 4  
7
ZDF  
8
. . . . .  
9
DISCOVER  
10  
Delete a channel.  
16  
 
>> Edit tuned TV channels  
Adjust tuned channels  
You can store TV channels on channel  
numbers of their own. Fine tune the  
IfꢀtheꢀitemꢀTVꢀSYSTEMꢀappearsꢀonꢀtheꢀmenu,ꢀ  
thenꢀmakeꢀsureꢀthatꢀtheꢀcorrectꢀbroadcastꢀ  
MANUAL TUNING  
channel reception, indicate the presence systemꢀisꢀdisplayedꢀbeforeꢀyouꢀbeginꢀtuning.ꢀ  
FREQUENCY  
CHANNEL NO.  
NAME  
FINE TUNE  
DECODER  
TV SYSTEM  
SOUND  
217  
7
DR 1  
0
of coded channels and choose  
appropriate sound types for the  
individual channels.  
Ifꢀchannelsꢀareꢀbroadcastedꢀwithꢀtwoꢀ  
languagesꢀandꢀyouꢀwantꢀbothꢀlanguages,ꢀ  
youꢀcanꢀstoreꢀtheꢀchannelꢀtwice,ꢀonceꢀwithꢀ  
OFF  
PAL B/G  
STEREO  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ eachꢀlanguage.ꢀ  
TUNING.ꢀ  
>Pressꢀtheꢀcentreꢀbutton toꢀbringꢀupꢀtheꢀ  
TUNINGꢀmenuꢀandꢀhighlightꢀMANUALꢀ  
TUNING.ꢀ  
Even though you store a type of sound/  
language, you can switch between the various  
types while watching a TV programme.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
MANUALꢀTUNINGꢀmenu.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀandꢀdownꢀtoꢀ  
moveꢀbetweenꢀtheꢀitemsꢀinꢀtheꢀmenu.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀandꢀrightꢀtoꢀ  
viewꢀyourꢀchoicesꢀforꢀeachꢀitem.ꢀ  
>IfꢀyouꢀchooseꢀNAME,ꢀthenꢀpressꢀtheꢀ  
greenꢀbuttonꢀtoꢀstartꢀtheꢀnamingꢀ  
procedure.ꢀUseꢀtheꢀnavigationꢀbuttonꢀupꢀ  
andꢀdownꢀtoꢀenterꢀtheꢀcharactersꢀinꢀtheꢀ  
nameꢀyouꢀchoose.ꢀUseꢀtheꢀnavigationꢀ  
buttonꢀleftꢀandꢀrightꢀtoꢀmoveꢀbetweenꢀtheꢀ  
charactersꢀinꢀtheꢀname.ꢀ  
>Whenꢀyouꢀhaveꢀfinishedꢀediting,ꢀpressꢀtheꢀ  
centre buttonꢀtoꢀacceptꢀtheꢀsettings.ꢀ  
>Pressꢀtheꢀcentre button toꢀstoreꢀtheꢀ  
adjustedꢀchannel.ꢀ  
>PressꢀandꢀholdꢀBACK toꢀexitꢀallꢀmenus.ꢀ  
17  
 
 
Re-tune or add channels  
You can re-tune all your TV channels by  
letting the television tune in all the  
channels automatically. You can also add  
a new channel or update a tuned  
channel which, for example, has been  
moved by the broadcaster.  
Youꢀcanꢀmakeꢀyourꢀtelevisionꢀfindꢀ  
yourꢀTVꢀchannelsꢀforꢀyou.ꢀ  
AUTO TUNING  
1 . . . . .  
Presetꢀupꢀtoꢀ99ꢀdifferentꢀTVꢀ  
channelsꢀonꢀchannelꢀnumbersꢀofꢀ  
theirꢀownꢀandꢀgiveꢀeachꢀchannelꢀ  
aꢀdistinctꢀname.ꢀ  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ NOTE! If you re-tune all your TV channels, all  
TUNING.ꢀ  
the channel settings you have made  
disappear!  
Youꢀcanꢀtuneꢀinꢀnewꢀchannels,ꢀ  
forꢀexample,ꢀifꢀyouꢀmoveꢀ–ꢀorꢀ  
re-tuneꢀpreviouslyꢀdeletedꢀ  
channels.ꢀ  
>Pressꢀtheꢀcentreꢀbutton toꢀbringꢀupꢀtheꢀ  
TUNINGꢀmenu.ꢀ  
EDIT CHANNELS  
..... . . . . . . . . . . . . . . .  
31 PRIME  
32TV 2  
33 . . . . .  
34 BBC 1  
35 EUROSPORT  
36 TV 4  
37 ZDF  
38 . . . . .  
Re-tune via automatic tuning …  
>InꢀtheꢀTUNINGꢀmenuꢀhighlightꢀAUTOꢀ  
TUNING.ꢀ  
Whenꢀtuningꢀinꢀchannelsꢀviaꢀtheꢀ  
ADDꢀCHANNELSꢀmenu,ꢀyourꢀ  
previouslyꢀtunedꢀchannelsꢀareꢀ  
leftꢀunchanged.ꢀThisꢀallowsꢀyouꢀ  
toꢀkeepꢀchannelꢀnames,ꢀtheirꢀ  
orderꢀinꢀtheꢀTVꢀlist,ꢀandꢀanyꢀ  
specialꢀsettingsꢀyouꢀmayꢀhaveꢀ  
storedꢀforꢀthoseꢀchannels.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
AUTOꢀTUNINGꢀmenu.  
>Useꢀtheꢀnavigationꢀbuttonꢀrightꢀtoꢀstartꢀ  
autoꢀtuning.ꢀ  
>Onceꢀautoꢀtuningꢀisꢀcompleted,ꢀtheꢀEDITꢀ  
CHANNELSꢀmenuꢀappears.ꢀYouꢀcanꢀthenꢀ  
removeꢀorꢀnameꢀchannels.ꢀ  
39 DISCOVER  
40 . . . . .  
Add new TV channels …  
>InꢀtheꢀTUNINGꢀmenuꢀhighlightꢀADDꢀ  
CHANNELS.ꢀꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
ADDꢀCHANNELSꢀmenu.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀrightꢀtoꢀstart.ꢀ  
Newꢀchannelsꢀareꢀaddedꢀautomaticallyꢀasꢀ  
theyꢀareꢀfound.ꢀ  
>Whenꢀtuningꢀisꢀcompletedꢀandꢀnewꢀ  
channelsꢀhaveꢀbeenꢀadded,ꢀtheꢀEDITꢀ  
CHANNELSꢀmenuꢀappears.ꢀYouꢀcanꢀthenꢀ  
removeꢀorꢀnameꢀchannels.ꢀTheꢀcursorꢀ  
highlightsꢀtheꢀfirstꢀnewꢀchannelꢀjustꢀaddedꢀ  
toꢀtheꢀlist.ꢀ  
18  
 
 
Loudspeaker setup – surround sound  
AddꢀPowerꢀLinkꢀspeakersꢀandꢀaꢀ  
BeoLabꢀsubwooferꢀtoꢀyourꢀ  
televisionꢀandꢀyouꢀhaveꢀaꢀ  
surroundꢀsoundꢀsystem.  
Select your speaker types  
Switch on the television before you  
SPEAKER TYPE  
adjust speaker settings.  
FRONT  
REAR  
SUBWOOFER  
BEOLAB 8000  
BEOLAB 4000  
YES  
To register the speaker types …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ  
OPTIONS.ꢀ  
Aꢀsurroundꢀsoundꢀsetupꢀfitsꢀ  
easilyꢀintoꢀyourꢀlivingꢀroom.ꢀLetꢀ  
theꢀpictureꢀdetermineꢀyourꢀidealꢀ  
viewingꢀandꢀlisteningꢀposition.ꢀ  
Youꢀgetꢀtheꢀbestꢀsoundꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀSOUND.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SOUNDꢀmenuꢀandꢀhighlightꢀSPEAKERꢀ  
TYPE.ꢀ  
At least one front speaker must be  
configured in the SPEAKER TYPE menu, to  
make the menus SPEAKER DISTANCE and  
SPEAKER LEVEL available.  
experienceꢀinꢀtheꢀareaꢀcreatedꢀbyꢀ  
theꢀspeakers.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SPEAKERꢀTYPEꢀmenuꢀandꢀuseꢀtheꢀ  
navigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀrevealꢀ  
yourꢀspeakerꢀtype.ꢀ  
>Pressꢀtheꢀnavigationꢀbuttonꢀdownꢀtoꢀmoveꢀ  
toꢀtheꢀnextꢀspeakerꢀandꢀuseꢀtheꢀnavigationꢀ  
buttonꢀleftꢀorꢀrightꢀtoꢀrevealꢀyourꢀspeakerꢀ  
type.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀorꢀpressꢀ  
BACKꢀtoꢀleaveꢀtheꢀmenuꢀwithoutꢀstoring.ꢀ  
19  
 
 
>> Loudspeaker setup – surround sound  
Set speaker distance  
Switch on the television from your  
favourite viewing position. Enter the  
straight-line distances in metres  
between your position and the  
individual speakers.  
SPEAKER DISTANCE  
CENTRE  
1.0 M  
1.0 M  
1.0 M  
1.0 M  
1.0 M  
1.0 M  
LEFT FRONT  
RIGHT FRONT  
RIGHT REAR  
LEFT REAR  
SUBWOOFER  
To set the speaker distances …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ  
OPTIONS.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀSOUND.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SOUNDꢀmenuꢀandꢀhighlightꢀSPEAKERꢀ  
DISTANCE.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SPEAKERꢀDISTANCEꢀmenu.ꢀ  
LEFT  
FRONT  
RIGHT  
FRONT  
CENTRE  
>Moveꢀtheꢀcursorꢀfromꢀspeakerꢀtoꢀspeakerꢀ  
andꢀuseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀ  
toꢀselectꢀtheꢀapproximateꢀstraight-lineꢀ  
distanceꢀinꢀmetresꢀbetweenꢀyourꢀviewingꢀ  
positionꢀandꢀeachꢀofꢀtheꢀspeakers.ꢀ  
>Whenꢀyouꢀhaveꢀenteredꢀtheꢀappropriateꢀ  
speakerꢀdistances,ꢀpressꢀtheꢀcentreꢀ  
buttonꢀtoꢀstoreꢀorꢀpressꢀBACKꢀtoꢀleaveꢀtheꢀ  
menuꢀwithoutꢀstoring.ꢀ  
LEFT  
REAR  
RIGHT  
REAR  
20  
 
>> Loudspeaker setup – surround sound  
Calibrate the sound level  
When you have connected speakers in a  
surround sound setup to the television,  
you must perform a speaker calibration.  
SPEAKER LEVEL  
SEQUENCE  
MANUAL  
.... . . . . . .  
.... . . . . . .  
.... . . . . . .  
.... . . . . . .  
LEFT FRONT  
RIGHT FRONT  
RIGHT REAR  
LEFT REAR  
A calibration sound is produced  
alternately in each of the speakers you  
have connected in your surround sound  
setup. Your task is to adjust the sound  
level from all the connected speakers to  
match the sound level from the centre  
speaker. You can choose whether you  
want the sound sequence to occur  
automatically or manually.  
To calibrate the sound level …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀ  
highlightꢀOPTIONS.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀSOUND.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SOUNDꢀmenuꢀandꢀhighlightꢀSPEAKERꢀ  
LEVEL.ꢀ  
Once you have performed your speaker  
calibration, you will only need to re-  
calibrate the speaker sound if you make  
changes to the setup, for example, if  
you move one or more of the speakers.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SPEAKERꢀLEVELꢀmenu.ꢀSEQUENCEꢀisꢀ  
highlighted.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
chooseꢀbetweenꢀAUTOMATICꢀandꢀ  
MANUAL.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
adjustꢀtheꢀspeakerꢀsoundꢀandꢀuseꢀtheꢀ  
navigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀmoveꢀtoꢀ  
anotherꢀspeaker.ꢀ  
>Whenꢀyouꢀhaveꢀadjustedꢀtheꢀsoundꢀforꢀallꢀ  
theꢀspeakersꢀinꢀyourꢀsurroundꢀsoundꢀsetup,ꢀ  
pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀorꢀpressꢀ  
BACK toꢀleaveꢀtheꢀmenuꢀwithoutꢀstoring.  
21  
 
>> Loudspeaker setup – surround sound  
See the name of the active sound system  
You can see the name of the active  
SOUND SYSTEM  
sound system for a source or programme  
on the screen. However, it is not possible  
to adjust or preset a sound system.  
INPUT FORMAT:  
MONO/STEREO  
OUTPUT FORMAT:  
STEREO  
SPEAKER 1  
To see the active sound system …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ  
OPTIONS.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀSOUND.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SOUNDꢀSETUPꢀmenuꢀandꢀhighlightꢀ  
SOUNDꢀSYSTEM.ꢀ  
An example of a sound system that can  
appear in the menu.  
>Pressꢀtheꢀcentreꢀbutton toꢀbringꢀupꢀtheꢀ  
SOUNDꢀSYSTEMꢀmenu.ꢀTheꢀactiveꢀsoundꢀ  
systemꢀisꢀshown.ꢀ  
Your speaker combination does not need to  
match the number of available channels for  
the sound system to be in effect.  
>PressꢀandꢀholdꢀBACKꢀtoꢀleaveꢀallꢀmenus.ꢀ  
22  
 
Adjust picture and sound settings  
Pictureꢀandꢀsoundꢀsettingsꢀareꢀ  
presetꢀfromꢀtheꢀfactoryꢀtoꢀ  
neutralꢀvaluesꢀwhichꢀsuitꢀmostꢀ  
viewingꢀandꢀlisteningꢀsituations.ꢀ  
However,ꢀifꢀyouꢀwish,ꢀyouꢀcanꢀ  
adjustꢀtheseꢀsettingsꢀtoꢀyourꢀ  
liking.ꢀ  
Adjust brightness, colour or contrast  
Adjust the picture settings via the  
PICTURE  
PICTURE menu. Temporary settings are  
cancelled when you switch off the  
television.  
BRIGHTNESS  
CONTRAST  
COLOUR  
TINT  
.... . . . .  
.... . . . .  
.... . . . .  
.... . . . .  
.... . . . .  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀ  
highlightꢀOPTIONS.ꢀꢀ  
SIZE  
GAME MODE  
Adjustꢀpictureꢀbrightness,ꢀ  
contrastꢀorꢀcolour.ꢀSoundꢀ  
settingsꢀincludeꢀvolume,ꢀbassꢀ  
andꢀtreble.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀPICTURE.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
PICTUREꢀmenu.  
When signals are sent in format 720p,  
1080p or 1080i, the menu item SIZE is  
available in the PICTURE menu.  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ  
moveꢀthroughꢀmenuꢀitems.  
Storeꢀyourꢀpictureꢀandꢀsoundꢀ  
settingsꢀtemporarilyꢀ–ꢀuntilꢀyourꢀ  
televisionꢀisꢀswitchedꢀoffꢀ–ꢀorꢀ  
storeꢀthemꢀpermanently.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
adjustꢀtheꢀvalues.  
>PressꢀBACK toꢀstoreꢀyourꢀsettingsꢀuntilꢀ  
youꢀswitchꢀoffꢀtheꢀtelevision,ꢀor  
>ꢀpressꢀtheꢀcentreꢀbutton toꢀstoreꢀyourꢀ  
settingsꢀpermanently.  
ActivateꢀGAMEꢀMODEꢀifꢀyouꢀ  
connectꢀaꢀgameꢀconsoleꢀtoꢀyourꢀ  
television.  
ForꢀvideoꢀsourcesꢀusingꢀtheꢀVGAꢀsignal,ꢀtheꢀ  
followingꢀoptionsꢀappearꢀasꢀwell:  
HOR.ꢀSIZEꢀ…ꢀAdjustsꢀtheꢀpictureꢀsizeꢀalongꢀ  
theꢀhorizontalꢀaxis.  
Forꢀinformationꢀaboutꢀhowꢀtoꢀ  
changeꢀtheꢀpictureꢀformat,ꢀseeꢀ  
GettingꢀStarted.ꢀ  
VERT.ꢀSIZEꢀ…ꢀAdjustsꢀtheꢀpictureꢀsizeꢀalongꢀ  
theꢀverticalꢀaxis.ꢀ  
HOR.ꢀPOSITIONꢀ…ꢀAdjustsꢀtheꢀpictureꢀ  
positionꢀalongꢀtheꢀhorizontalꢀaxis.ꢀ  
VERT.ꢀPOSITIONꢀ…ꢀAdjustsꢀtheꢀpictureꢀ  
positionꢀalongꢀtheꢀverticalꢀaxis.ꢀ  
Noteꢀthatꢀtheseꢀfourꢀsettingsꢀonlyꢀapplyꢀforꢀ  
theꢀscreenꢀresolutionꢀinꢀeffectꢀatꢀtheꢀtimeꢀ  
youꢀadjustꢀtheꢀsettings.ꢀ  
To temporarily remove the picture from the  
screen, press LIST and use the navigation  
button up or down to bring up P.MUTE in  
the Beo4 display and press the centre  
button. To restore the picture, press a  
source button. (Beo5: Press  
to bring up  
the Scene display on Beo5, press Picture,  
then press P.Mute. To restore the picture,  
press P.Mute again).  
23  
 
 
>> Adjust picture and sound settings  
Game mode  
If you connect a game console or play a  
PC game using the television as a  
To activate GAME MODE with Beo5  
directly …  
monitor, you can activate ‘Game mode’.  
Game mode minimises the delay caused  
by signal processing. Game mode is  
automatically deactivated when you  
change source or switch to standby.  
>PressꢀGame toꢀactivateꢀGAMEꢀMODE,ꢀ  
pressꢀagainꢀtoꢀdeactivateꢀGAMEꢀMODE.  
To use GAME MODE …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀ  
highlightꢀOPTIONS.ꢀꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀPICTURE.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
PICTUREꢀmenu.  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ  
moveꢀtoꢀGAMEꢀMODE.  
>Pressꢀtheꢀcentreꢀbuttonꢀrepeatedlyꢀtoꢀ  
switchꢀbetweenꢀONꢀandꢀOFF.  
To activate GAME MODE with Beo4  
directly …  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀGAMEꢀinꢀtheꢀ  
Beo4ꢀdisplay.  
>Pressꢀtheꢀcentreꢀbuttonꢀrepeatedlyꢀtoꢀ  
switchꢀbetweenꢀONꢀandꢀOFF.  
24  
 
>> Adjust picture and sound settings  
Adjust volume, bass or treble  
Sound settings are preset at the factory  
to neutral values which suit most  
listening situations. However, if you  
wish, you can adjust these settings to  
your liking.  
To adjust sound …  
ADJUSTMENT  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ  
OPTIONS.  
VOLUME  
BASS  
TREBLE  
SUBWOOFER  
LOUDNESS  
DEFAULT VIDEO  
DEFAULT AUDIO  
.... . . . .  
.... . . . .  
.... . . . .  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀSOUND.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SOUNDꢀmenu,ꢀandꢀhighlightꢀ  
.... . . . .  
ON  
SPEAKER3  
SPEAKER2  
You can preset levels for sound volume,  
bass, treble and a subwoofer.  
ADJUSTMENT.  
>Pressꢀtheꢀcentreꢀbutton toꢀbringꢀupꢀtheꢀ  
ADJUSTMENTꢀmenu.  
You can switch the loudness feature on  
or off. The loudness feature  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ  
selectꢀanꢀitemꢀtoꢀadjust.  
compensates for the human ear’s lack of  
sensitivity to high and low frequencies.  
These frequencies are boosted at low  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
adjustꢀtheꢀvaluesꢀorꢀchooseꢀaꢀsetting.ꢀ  
The content of the ADJUSTMENT menu  
varies according to what you have  
volume levels so that low music becomes >PressꢀBACK toꢀstoreꢀyourꢀsettingsꢀuntilꢀyouꢀ connected to the television.  
more dynamic.  
switchꢀoffꢀyourꢀtelevision,ꢀor …ꢀ  
>… pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀyourꢀ  
settingsꢀpermanently.ꢀ  
In addition, you can preset two default  
speaker combinations; one to be used  
each time you switch on a video source  
in your television, and one to be used  
each time you switch on an audio source  
connected to your television. You can  
still select a different speaker combination  
any time you wish.  
For further information about speaker  
combinations, see page 26.  
25  
 
Daily use of speaker combinations  
Youꢀcanꢀextendꢀyourꢀtelevisionꢀintoꢀ Select speakers for movie sound  
aꢀsurroundꢀsoundꢀsystemꢀbyꢀaddingꢀ  
You can select the speaker combination  
Bangꢀ&ꢀOlufsenꢀloudspeakersꢀandꢀaꢀ  
that suits the source you are using,  
BeoLabꢀsubwoofer.ꢀ  
provided that the various speaker  
modes are available in your television.  
Whenꢀyouꢀswitchꢀonꢀoneꢀofꢀtheꢀ  
sources,ꢀtheꢀtelevisionꢀautomaticallyꢀ  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
selectsꢀtheꢀappropriateꢀspeakers,ꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀSPEAKERꢀinꢀtheꢀ  
dependingꢀonꢀwhatꢀkindꢀofꢀsoundꢀ  
suitsꢀtheꢀsourceꢀyouꢀareꢀusing.ꢀTheꢀ  
speakerꢀcombinationꢀisꢀoptimisedꢀifꢀ  
youꢀselectꢀSPEAKERꢀinꢀtheꢀBeo4ꢀ  
displayꢀandꢀpressꢀtheꢀcentreꢀbuttonꢀ  
onꢀBeo4.ꢀ  
Beo4ꢀdisplayꢀ(Beo5:ꢀPressꢀ ꢀtoꢀbringꢀupꢀ  
theꢀSceneꢀdisplayꢀonꢀBeo5,ꢀthenꢀpressꢀ  
Speakerꢀtoꢀbringꢀupꢀthe Speakerꢀdisplay).ꢀ  
>Pressꢀtheꢀcentreꢀbutton,ꢀifꢀyouꢀwantꢀtoꢀ  
optimiseꢀtheꢀsound,ꢀorꢀpressꢀ1 – 5ꢀtoꢀ  
selectꢀtheꢀspeakerꢀcombinationꢀyouꢀwant.ꢀ  
(Beo5:ꢀPressꢀOptimise orꢀModeꢀ1ꢀ–ꢀ5).ꢀ  
Theꢀselectedꢀspeakersꢀcutꢀinꢀautomatically.ꢀ  
>PressꢀandꢀholdꢀBACK toꢀremoveꢀSPEAKERꢀ  
fromꢀtheꢀBeo4ꢀdisplayꢀandꢀreturnꢀtoꢀtheꢀ  
sourceꢀyouꢀwereꢀusing.ꢀ(Beo5:ꢀPressꢀ toꢀ  
removeꢀtheꢀSpeakerꢀdisplay).ꢀ  
SPEAKER 1  
SPEAKER 2  
SPEAKER 3  
SPEAKER 4  
SPEAKER 5  
NOTE! If you have added only two front  
speakers to the TV, you will only be able  
to choose SPEAKER 1 – 3.  
Adjust speaker balance with  
Beo4  
You can temporarily adjust the balance  
between the speakers.  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀBALANCEꢀinꢀtheꢀ  
Beo4ꢀdisplayꢀandꢀpressꢀtheꢀcentreꢀbutton.ꢀ  
>Nowꢀuseꢀ ,ꢀ ,ꢀ ꢀandꢀ ꢀtoꢀadjustꢀtheꢀ  
speakerꢀbalanceꢀfront,ꢀback,ꢀleftꢀandꢀright.  
>PressꢀandꢀholdꢀBACKꢀtoꢀremoveꢀSPEAKERꢀ  
fromꢀtheꢀBeo4ꢀdisplayꢀandꢀreturnꢀtoꢀtheꢀ  
sourceꢀyouꢀwereꢀusing.ꢀ  
26  
 
 
Set the television to switch itself on or off  
Yourꢀtelevisionꢀhasꢀaꢀbuiltꢀinꢀ  
SleepꢀTimerꢀwhichꢀmeansꢀthatꢀ  
youꢀcanꢀmakeꢀitꢀswitchꢀoffꢀafterꢀ  
aꢀdesignatedꢀnumberꢀofꢀminutes.  
Sleep Timer  
Play Timer  
You can make the television switch off  
If you connect a Bang & Olufsen audio  
automatically after a number of minutes. or video product to your television with  
a Master Link cable, you can exclude or  
To activate the Sleep Timer with Beo4 …  
include it in timed functions via the  
Alsoꢀyouꢀcanꢀmakeꢀtheꢀtelevisionꢀ  
reactꢀtoꢀaꢀTimerꢀPlayꢀ  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
PLAY TIMER menu. For example, set the  
upꢀorꢀdownꢀtoꢀbringꢀupꢀSLEEPꢀinꢀtheꢀBeo4ꢀ television Play Timer to ON and an audio  
programmedꢀonꢀanꢀAudioꢀorꢀ  
VideoꢀMasterꢀconnectedꢀtoꢀtheꢀ  
televisionꢀviaꢀMasterꢀLink.  
display.  
system’s Play Timer to OFF if you wish  
timed functions to apply only to the  
television.  
>Pressꢀtheꢀcentreꢀbuttonꢀrepeatedlyꢀtoꢀ  
selectꢀtheꢀnumberꢀofꢀminutes.  
IfꢀtheꢀTimerꢀPlayꢀsourceꢀisꢀDTV,ꢀ  
settingsꢀmustꢀbeꢀmadeꢀinꢀtheꢀ  
DTVꢀPLAYꢀTIMERꢀmenu.  
To deactivate the Sleep Timer with  
Beo4 …  
To switch on the Play Timer …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ  
PLAYꢀTIMER.ꢀ  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀSLEEPꢀinꢀtheꢀBeo4ꢀ >ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
display.  
PLAYꢀTIMERꢀmenu,ꢀandꢀhighlightꢀTIMERꢀ  
ON/OFF.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀrepeatedlyꢀuntilꢀ  
OFFꢀisꢀshownꢀinꢀtheꢀtelevisionꢀdisplay.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
TIMERꢀON/OFFꢀmenu.ꢀ  
To activate or deactivate the Sleep Timer >Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
with Beo5 …  
revealꢀON.ꢀ  
>PressꢀSleepꢀandꢀselectꢀtheꢀnumberꢀofꢀ  
minutesꢀorꢀOff.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ  
setting.  
To set the Sleep Timer via the menu …  
For further information about how to  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ program Timers and switch the Play Timer  
SLEEPꢀTIMER.ꢀ  
on or off for a connected Bang & Olufsen  
audio or video product, see the Guide  
enclosed with the product.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SLEEPꢀTIMERꢀmenu.  
>Pressꢀtheꢀcentreꢀbuttonꢀrepeatedlyꢀtoꢀ  
switchꢀbetweenꢀtheꢀnumberꢀofꢀminutesꢀ  
andꢀOFF.  
27  
 
 
>> Set the television to switch itself on or off  
DTV Play Timer  
Auto standby  
You can program a Play Timer on a  
connected Bang & Olufsen audio or  
video product. If the Play Timer uses the  
DVB Module in the television as source,  
you must tell it which MODE it should  
start in. That is should radio or television  
switch on. Also you must tell it which  
GROUP, that is which of the station or  
channel groups should be used when  
the Play Timer is executed.  
The television can be set to switch itself  
to standby after some time with no  
operation. The factory setting is 4 hours.  
This function only applies in video mode  
not in audio mode.  
DTV PLAY TIMER  
MODE  
GROUP  
TV  
SPORT  
To activate the auto standby …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ  
OPTIONS.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀAUTOꢀ  
STANDBY.  
DTV PLAY TIMER menu  
To make settings for a DTV Play Timer …  
AUTO STANDBY  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ >ꢀPressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONS.ꢀ  
AUTOꢀSTANDBYꢀmenu.ꢀ  
AFTER 1 HOUR  
AFTER 2 HOURS  
AFTER 4 HOURS  
OFF  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀDTVꢀPLAYꢀ  
TIMER.  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ  
selectꢀtheꢀsettingꢀyouꢀwant.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ  
setting.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
DTVꢀPLAYꢀTIMERꢀmenu,ꢀandꢀuseꢀtheꢀ  
navigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀmoveꢀ  
betweenꢀMODEꢀandꢀGROUP.  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
selectꢀtheꢀsettingꢀyouꢀwant.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ  
setting.  
>PressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀpreviousꢀ  
menusꢀorꢀpressꢀandꢀholdꢀBACK toꢀexitꢀallꢀ  
menus.ꢀ  
AUTO STANDBY menu  
When you have activated the function, a  
message appears on your television screen if  
the television has not been operated during  
the time set in the menu. The television then  
switches to standby, if you do not operate it.  
>PressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀpreviousꢀ  
menusꢀorꢀpressꢀandꢀholdꢀBACK toꢀexitꢀallꢀ  
menus.ꢀ  
Note! If the TV tuner is disabled, and the  
DVB module is activated by pressing TV on  
the remote control, the name of the menu is  
TV PLAY TIMER.  
Also remember to set the PLAY TIMER menu  
to ON, if the television or its speakers are to  
be activated by the Play Timer.  
28  
 
 
Set up your Beo4 remote control  
Youꢀmustꢀsetꢀupꢀyourꢀtelevisionꢀ  
toꢀbeꢀoperatedꢀwithꢀaꢀBeo4ꢀwith,ꢀ  
orꢀwithoutꢀaꢀnavigationꢀbutton.  
Beo4 type  
In the BEO4 SETTING menu you set up  
BEO4 SETTING  
whether the Beo4 remote control you  
are using has a navigation button or not.  
Evenꢀthoughꢀyourꢀremoteꢀcontrolꢀ  
hasꢀaꢀnavigationꢀbutton,ꢀyouꢀcanꢀ  
chooseꢀtoꢀsetꢀyourꢀtelevisionꢀupꢀ  
forꢀoperationꢀwithoutꢀnavigationꢀ  
button.ꢀThisꢀcanꢀbeꢀusefulꢀifꢀyouꢀ  
haveꢀaꢀBeoLinkꢀsystemꢀalsoꢀ  
NAVIGATION BUTTON  
To make Beo4 settings …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ  
OPTIONS.ꢀ  
NO NAVIGATION BUTTON  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenu,ꢀandꢀhighlightꢀBEO4ꢀ  
SETTING.ꢀ  
For information about menu operation with  
the different types of remote controls, see  
comprisingꢀaꢀtelevisionꢀwithoutꢀ  
theꢀBEO4ꢀSETTINGꢀmenu.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
BEO4ꢀSETTINGꢀmenu.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀupꢀorꢀdownꢀtoꢀ  
revealꢀtheꢀsettingꢀyouꢀwant.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ  
setting.ꢀ  
Ifꢀyouꢀsetꢀupꢀyourꢀtelevisionꢀforꢀ  
operationꢀwithoutꢀaꢀnavigationꢀ  
buttonꢀandꢀyourꢀBeo4ꢀhasꢀaꢀ  
navigationꢀbutton,ꢀyouꢀmustꢀalsoꢀ  
changeꢀtheꢀMODEꢀsettingꢀofꢀ  
yourꢀBeo4.ꢀSeeꢀtheꢀBeo4ꢀGuideꢀ  
forꢀfurtherꢀinformation.ꢀ  
>PressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀpreviousꢀ  
menusꢀorꢀpressꢀandꢀholdꢀBACK toꢀexitꢀallꢀ  
menus.ꢀ  
29  
 
 
Feature activation  
Additionalꢀfeaturesꢀinꢀyourꢀ  
televisionꢀcanꢀbeꢀmadeꢀaccessibleꢀ  
viaꢀtheꢀFEATUREꢀACTIVATIONꢀ  
menu.ꢀForꢀinformationꢀaboutꢀ  
additionalꢀfeatures,ꢀcontactꢀyourꢀ  
Bangꢀ&ꢀOlufsenꢀretailer.ꢀ  
Feature activation key  
In order for additional features to  
become available, a feature activation  
key must be entered. The feature key  
can be purchased from your Bang &  
Olufsen retailer. The key cannot be  
deactivated again.  
FEATURE ACTIVATION  
KEY ....-....-....  
To enter an activation key …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀ  
highlightꢀOPTIONS.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀFEATUREꢀ  
ACTIVATION.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
FEATUREꢀACTIVATIONꢀmenu.ꢀ  
>Selectꢀtheꢀfeature,ꢀyouꢀwishꢀtoꢀactivateꢀ  
andꢀpressꢀtheꢀcentreꢀbutton.ꢀ  
>Useꢀtheꢀnumberꢀbuttonsꢀtoꢀenterꢀtheꢀ12ꢀ  
digitꢀkey.ꢀAnꢀIncorrectꢀnumberꢀcanꢀbeꢀ  
deletedꢀbyꢀpressingꢀtheꢀnavigationꢀbuttonꢀ  
left,ꢀallꢀnumbersꢀcanꢀbeꢀdeletedꢀbyꢀ  
pressingꢀBACK.ꢀ  
>Whenꢀtheꢀnumbersꢀareꢀentered,ꢀpressꢀtheꢀ  
centreꢀbuttonꢀtoꢀaccept.ꢀ  
30  
 
 
HDMI MATRIX  
TheꢀHDMIꢀMATRIXꢀfeatureꢀisꢀanꢀ  
additionalꢀfeatureꢀwhichꢀcanꢀbeꢀ  
purchasedꢀseparately.ꢀWhenꢀtheꢀ  
purchasedꢀfeatureꢀactivationꢀkeyꢀ  
isꢀentered,ꢀadditionalꢀsoftwareꢀ  
becomesꢀavailableꢀinꢀyourꢀ  
Important information  
The HDMI MATRIX must be connected  
and set up by your Bang & Olufsen  
retailer.  
HDMI MATRIX  
MATRIX  
INPUTS  
IR SOCKET  
IR TYPE  
HDMI  
YES  
16  
PUC1  
PLUG  
A
–ꢀ YourꢀBeo5ꢀremoteꢀcontrolꢀmustꢀbeꢀ  
reconfiguredꢀbeforeꢀyouꢀcanꢀuseꢀtheꢀ  
HDMIꢀMatrix.ꢀ  
television.ꢀTheꢀHDMIꢀMatrixꢀitselfꢀ  
isꢀaꢀphysicalꢀproductꢀthatꢀcanꢀbeꢀ  
connectedꢀallowingꢀyouꢀtoꢀ  
–ꢀ YouꢀcannotꢀoperateꢀtheꢀHDMIꢀMatrixꢀwithꢀ  
aꢀBeo4ꢀremoteꢀcontrol.ꢀ  
–ꢀ YouꢀcannotꢀconnectꢀmoreꢀthanꢀoneꢀHDMIꢀ  
Matrixꢀinꢀaꢀsetup.ꢀ  
connectꢀupꢀtoꢀ32ꢀexternalꢀ  
sourcesꢀtoꢀyourꢀtelevisionꢀandꢀ  
accessꢀthemꢀviaꢀtheꢀBeo5ꢀremoteꢀ  
control.ꢀForꢀinformationꢀaboutꢀ  
additionalꢀfeatures,ꢀcontactꢀyourꢀ  
Bangꢀ&ꢀOlufsenꢀretailer.ꢀ  
–ꢀ TheꢀHDMIꢀMatrixꢀcannotꢀbeꢀconfiguredꢀonꢀ Settings in the HDMI MATRIX menu …  
anꢀHDMIꢀExpander.ꢀ  
InꢀtheꢀHDMIꢀMATRIXꢀmenu,ꢀyouꢀcanꢀselectꢀ  
settingsꢀforꢀyourꢀHDMIꢀMatrix.  
In the CONNECTIONS menu …  
>OpenꢀtheꢀHDMIꢀMATRIXꢀmenu.ꢀ  
>SetꢀtheꢀfieldꢀMATRIXꢀtoꢀYES.ꢀ  
>SetꢀtheꢀfieldꢀINPUTSꢀtoꢀatꢀleastꢀtheꢀsameꢀ  
numberꢀofꢀsourcesꢀasꢀyouꢀhaveꢀconnected.ꢀ  
>SelectꢀanꢀIRꢀsocket.ꢀYouꢀcannotꢀselectꢀ  
NONE.ꢀ  
>SelectꢀanꢀIRꢀTYPEꢀtoꢀindicateꢀhowꢀtheꢀTVꢀ  
controlꢀisꢀconnectedꢀtoꢀtheꢀHDMIꢀMatrix.ꢀ  
>SelectꢀanꢀHDMIꢀsocket.ꢀYouꢀcannotꢀselectꢀ  
NONE.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ  
HDMIꢀMATRIXꢀmenu.ꢀ  
>Afterꢀyouꢀhaveꢀstoredꢀyourꢀsettings,ꢀselectꢀ  
anꢀHDMIꢀMatrixꢀtype.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ  
settings.ꢀ  
If you at a later time disable a stored HDMI  
Matrix configuration by setting the HDMI  
Matrix field to NO, your settings for INPUTS  
are still saved. This means that if you set the  
field to YES later, the settings reappear.  
31  
 
 
>> HDMI MATRIX  
Add sources to your setup …  
HDMI MATRIX  
TheꢀsourcesꢀconnectedꢀtoꢀtheꢀHDMIꢀMatrixꢀ  
mustꢀbeꢀregisteredꢀinꢀtheꢀtelevision.  
INPUT 1  
INPUT 2  
INPUT 3  
INPUT 4  
INPUT 5  
INPUT 6  
INPUT 7  
INPUT 8  
NONE  
NONE  
NONE  
NONE  
NONE  
NONE  
NONE  
NONE  
Configuration of inputs …  
>Configureꢀeachꢀinputꢀoneꢀbyꢀone.ꢀ  
>Nameꢀeachꢀinputꢀbyꢀfollowingꢀon-screenꢀ  
instructions.ꢀIfꢀyouꢀdoꢀnotꢀnameꢀanꢀinput,ꢀ  
theꢀnameꢀfromꢀtheꢀselectedꢀPUCꢀlistꢀisꢀ  
used.ꢀ  
>SelectꢀaꢀPUCꢀsourceꢀforꢀtheꢀspecificꢀinput.ꢀ  
Theꢀsourcesꢀareꢀdividedꢀintoꢀfourꢀ  
categories:ꢀSET-TOPꢀBOX,ꢀDVDꢀPLAYER/  
RECORDER,ꢀVIDEOꢀRECORDERꢀandꢀ  
OTHER.ꢀ  
>Whenꢀyouꢀstoreꢀtheꢀinputꢀsettings,ꢀyouꢀ  
canꢀconfigureꢀtheꢀnextꢀinput.ꢀContinueꢀ  
theꢀprocedureꢀuntilꢀallꢀconnectedꢀinputsꢀ  
areꢀconfigured.ꢀ  
>Pressꢀtheꢀgreenꢀbuttonꢀtoꢀreturnꢀtoꢀtheꢀ  
CONNECTIONSꢀmenu.ꢀ  
32  
 
Teletext  
Dailyꢀuseꢀofꢀteletextꢀisꢀdescribedꢀinꢀ Store favourite teletext pages  
Day-to-day use of MEMO pages  
GettingꢀStarted,ꢀhowever,ꢀyouꢀcanꢀ  
Nine MEMO pages are available for each You may wish to refer to your teletext  
alsoꢀstoreꢀfavouriteꢀteletextꢀpagesꢀ  
forꢀquickꢀreference.  
television channel’s teletext service.  
MEMO pages quickly, for example, if  
you are leaving for work and wish to  
check traffic information on a teletext  
service.  
To create a MEMO page …  
>Bringꢀupꢀaꢀpageꢀyouꢀviewꢀoften.ꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
moveꢀtheꢀcursorꢀalongꢀtheꢀmenuꢀbarꢀtoꢀ  
SETUPꢀandꢀpressꢀtheꢀcentreꢀbutton.ꢀ  
Theꢀ9ꢀavailableꢀMEMOꢀslotsꢀareꢀshownꢀbyꢀ  
number.ꢀTheꢀfirstꢀisꢀhighlighted.ꢀ  
To view MEMO pages …  
>PressꢀTEXTꢀtoꢀbringꢀupꢀteletext.ꢀ  
>Pressꢀ ꢀorꢀ ꢀtoꢀmoveꢀbetweenꢀMEMOꢀ  
pages.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ  
currentꢀpage.ꢀTheꢀcursorꢀmovesꢀtoꢀtheꢀ  
nextꢀavailableꢀMEMOꢀslot.ꢀ  
>PressꢀBACKꢀtoꢀleaveꢀteletext.ꢀ  
To delete a MEMO page …  
>UseꢀtheꢀnumberꢀbuttonsꢀonꢀBeo4ꢀtoꢀselectꢀ >ꢀUseꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
theꢀnextꢀteletextꢀpageꢀyouꢀwishꢀtoꢀstore.ꢀ  
>Repeatꢀtheꢀprocedureꢀforꢀeachꢀpageꢀyouꢀ  
wishꢀtoꢀstore.ꢀ  
moveꢀtheꢀcursorꢀtoꢀSETUPꢀandꢀpressꢀtheꢀ  
centreꢀbuttonꢀ  
>MoveꢀtheꢀcursorꢀtoꢀtheꢀMEMOꢀpageꢀyouꢀ  
wishꢀtoꢀdeleteꢀandꢀpressꢀtheꢀyellowꢀ  
button.ꢀ  
>ToꢀleaveꢀtheꢀMEMOꢀsetup,ꢀmoveꢀtheꢀ  
cursorꢀtoꢀBACKꢀonꢀtheꢀteletextꢀmenuꢀbarꢀ  
andꢀpressꢀtheꢀcentreꢀbutton.ꢀ  
>Pressꢀtheꢀyellowꢀbuttonꢀagainꢀtoꢀconfirm.ꢀ  
>PressꢀBACKꢀtoꢀleaveꢀteletext.  
To view teletext subtitles for a  
programme …  
Ifꢀyouꢀwantꢀavailableꢀteletextꢀsubtitlesꢀtoꢀ  
appearꢀautomaticallyꢀforꢀaꢀparticularꢀ  
programme,ꢀstoreꢀtheꢀteletextꢀsubtitlesꢀpageꢀ  
asꢀMEMOꢀpageꢀ9.ꢀHowever,ꢀsubtitlesꢀareꢀnotꢀ  
shownꢀwhenꢀtheꢀteletextꢀsourceꢀisꢀDVB-HD,ꢀ  
norꢀwhenꢀteletextꢀisꢀshownꢀinꢀdualꢀscreen.  
33  
 
 
Operate other equipment with Beo4 or Beo5  
Theꢀbuilt-inꢀPeripheralꢀUnitꢀ  
Controllerꢀactsꢀasꢀanꢀinterpreterꢀ  
betweenꢀconnectedꢀvideoꢀ  
equipment,ꢀsuchꢀasꢀaꢀset-topꢀ  
box,ꢀvideoꢀrecorderꢀorꢀDVDꢀ  
player,ꢀandꢀyourꢀBangꢀ&ꢀOlufsenꢀ  
remoteꢀcontrol.ꢀ  
Use the Beo4 remote control  
If you have a Beo4 remote control, some  
functions are available directly via Beo4  
when you switch on the equipment.  
Additional functions are available  
through a menu-overlay that you bring  
1
2
3
4
5
GUIDE  
MENU  
TEXT  
up on the screen. In this menu you can  
see which Beo4 buttons activate specific  
services or functions.  
UseꢀtheꢀBangꢀ&ꢀOlufsenꢀremoteꢀ  
controlꢀtoꢀgainꢀaccessꢀtoꢀtheꢀ  
functionsꢀofferedꢀbyꢀyourꢀnon-  
Bangꢀ&ꢀOlufsenꢀequipment.ꢀ  
INFO  
WIDE  
Your Bang & Oufsen retailer can provide  
you with a show mapping’ survey which  
explains operation of the connected  
equipment with Beo4 in more detail.  
Example of a menu-overlay. The Beo4  
buttons are shown to the right on the menu,  
and the functions they control are shown to  
the left. The menu may also list buttons on  
Whenꢀyouꢀswitchꢀonꢀtheꢀ  
equipment,ꢀtheꢀfunctionsꢀareꢀ  
availableꢀviaꢀaꢀmenu-overlayꢀonꢀ  
theꢀtelevisionꢀscreen,ꢀifꢀyouꢀuseꢀaꢀ  
Beo4ꢀremoteꢀcontrol,ꢀorꢀviaꢀtheꢀ  
Beo5ꢀdisplay.ꢀ  
>Pressꢀaꢀsourceꢀbutton,ꢀforꢀexampleꢀVMEM,ꢀ the remote control included with your  
toꢀswitchꢀonꢀconnectedꢀequipment.ꢀ  
connected equipment.  
>PressꢀMENUꢀtoꢀbringꢀupꢀtheꢀmenu-overlay.ꢀ  
>Pressꢀtheꢀnumberꢀbuttonꢀthatꢀactivatesꢀtheꢀ Direct Beo4 operation  
functionꢀyouꢀwant,ꢀorꢀpressꢀoneꢀofꢀtheꢀ  
colouredꢀbuttonsꢀtoꢀactivateꢀaꢀfunction.ꢀ  
If you know which Beo4 button activates  
the function you want, you can activate  
the function without bringing up the  
menu-overlay first.  
Forꢀinstructionꢀinꢀtheꢀvariousꢀ  
functionsꢀofferedꢀbyꢀyourꢀ  
equipment,ꢀseeꢀtheꢀproduct’sꢀ  
ownꢀguide.ꢀ  
The menu-overlay for equipment connected  
to a main room televison cannot be displayed  
on the television screen in the link room..  
While your equipment is on …  
>Pressꢀoneꢀofꢀtheꢀcolouredꢀbuttonsꢀtoꢀ  
activateꢀaꢀfunction.ꢀ  
Not all connected video equipment  
are supported by Bang & Olufsen. For  
further information about supported  
equipment, contact your Bang &  
Olufsen retailer.  
>Pressꢀandꢀholdꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀ  
upꢀtheꢀProgramꢀGuideꢀorꢀtheꢀ‘Now/Next’ꢀ  
bannerꢀonꢀtheꢀscreenꢀifꢀyouꢀareꢀusingꢀ  
equipmentꢀthatꢀsupportsꢀtheseꢀfunctions.  
>Useꢀ ꢀandꢀ ꢀtoꢀstepꢀbetweenꢀchannels*.  
>Useꢀ ꢀandꢀ ꢀtoꢀrewindꢀandꢀwindꢀin,ꢀforꢀ  
example,ꢀrecordings*.ꢀ  
>PressꢀMENUꢀandꢀuseꢀtheꢀnumberꢀbuttonsꢀ  
toꢀactivateꢀtheꢀfunctionꢀyouꢀwant.ꢀ  
*This operation does not apply to Beo4  
without navigation button.  
34  
 
 
>> Operate other equipment with Beo4 or Beo5  
Use equipment menus  
Use the Beo5 remote control  
Once you have activated connected  
equipment, you can operate its own  
menus with your remote control.  
The main functions of your equipment  
can be operated with the Beo5 remote  
control. Not all functions may be  
DTV  
Sky  
supported by Beo5. The available  
services and functions are shown in the  
Beo5 display when you activate the  
equipment.  
i
Interactive  
Box office  
TV Guide  
Help  
While equipment menus are shown …  
>Useꢀtheꢀnavigationꢀbuttonꢀup,ꢀdownꢀleftꢀ  
andꢀrightꢀtoꢀmoveꢀinꢀmenus.  
Slow  
R
Services  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀselectꢀandꢀ  
activateꢀaꢀfunction.  
>Pressꢀaꢀsourceꢀbutton,ꢀforꢀexampleꢀDTV,ꢀ  
toꢀswitchꢀonꢀconnectedꢀequipment.ꢀ  
>PressꢀtheꢀbuttonꢀonꢀtheꢀBeo5ꢀdisplayꢀthatꢀ  
activatesꢀtheꢀfunctionꢀyouꢀwant.ꢀ  
>Pressꢀtheꢀnumberꢀbuttonsꢀtoꢀenterꢀ  
informationꢀinꢀmenusꢀorꢀservicesꢀwhenꢀ  
relevant.ꢀ  
Example of a Beo5 display used to operate a  
set-top box.  
>Useꢀtheꢀcolouredꢀbuttonsꢀasꢀindicatedꢀinꢀ  
theꢀmenusꢀofꢀyourꢀconnectedꢀequipment.  
>PressꢀBACKꢀtoꢀbackꢀupꢀthroughꢀpreviousꢀ  
menusꢀorꢀpressꢀandꢀholdꢀBACK toꢀexitꢀallꢀ  
menus.  
When you have selected connected  
equipment as a source, press MENU twice  
to bring up the television’s main menu.  
35  
 
Connect and operate an audio system  
Ifꢀyourꢀtelevisionꢀisꢀequippedꢀ  
withꢀtheꢀoptionalꢀSystemꢀModuleꢀ  
andꢀyouꢀconnectꢀaꢀcompatibleꢀ  
audioꢀsystem,ꢀyouꢀobtainꢀtheꢀ  
benefitsꢀofꢀanꢀintegratedꢀaudio/  
videoꢀsystemꢀusingꢀaꢀMasterꢀLinkꢀ  
cable.  
Connect your audio system to the television  
Using a BeoLink cable, connect the  
sockets marked MASTER LINK on the  
Option 2  
Option 0  
television and the audio system.  
Program the AV setup with Beo4  
You can set your television, placed in an  
AV-system, to the correct Option using  
Beo4. Switch the entire system to  
standby first.  
PlayꢀaꢀCDꢀonꢀyourꢀaudioꢀsystemꢀ  
usingꢀspeakersꢀconnectedꢀtoꢀtheꢀ  
television,ꢀorꢀswitchꢀonꢀaꢀTVꢀ  
programmeꢀandꢀsendꢀtheꢀsoundꢀ  
toꢀyourꢀaudioꢀsystemꢀspeakers.ꢀ  
If the television and an audio system is set  
up in one room with all speakers connected  
to the television, set the television to  
Option setting for the television …  
>Whileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby)ꢀonꢀ  
Beo4,ꢀpressꢀLIST.ꢀ  
Option 2 and the audio system to Option 0.  
Option 1  
Option 1  
>Letꢀgoꢀofꢀbothꢀbuttons.ꢀ  
YourꢀAVꢀsystemꢀcanꢀbeꢀplacedꢀ  
togetherꢀinꢀoneꢀroomꢀorꢀinꢀtwoꢀ  
roomsꢀwithꢀtheꢀtelevisionꢀplacedꢀ  
inꢀoneꢀroomꢀandꢀtheꢀaudioꢀ  
systemꢀwithꢀaꢀsetꢀofꢀspeakersꢀ  
placedꢀinꢀanother.ꢀ  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀOPTION?ꢀinꢀtheꢀ  
Beo4ꢀdisplayꢀandꢀpressꢀtheꢀcentre button.ꢀ  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
toꢀbringꢀup V.OPT inꢀtheꢀBeo4ꢀdisplayꢀandꢀ  
thenꢀenterꢀtheꢀappropriateꢀnumberꢀ  
(1,ꢀ2ꢀorꢀ4).ꢀ  
If the television (with or without additional  
speakers) and the audio system (with a  
connected set of speakers) is set up in the  
same room, set the television to Option 1  
and the audio system to Option 1.  
Not all Bang & Olufsen audio systems  
support integration with the television.  
Option setting for the audio system …  
>Whileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby)ꢀonꢀ  
Beo4,ꢀpressꢀLIST.ꢀ  
>Letꢀgoꢀofꢀbothꢀbuttons.ꢀ  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀup OPTION?ꢀinꢀtheꢀ  
Beo4ꢀdisplayꢀandꢀpressꢀtheꢀcentreꢀbutton.ꢀ  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀA.OPTꢀinꢀtheꢀ  
Beo4ꢀdisplayꢀandꢀenterꢀtheꢀappropriateꢀ  
numberꢀ(0,ꢀ1,ꢀ2, 4, 5 or 6).ꢀ  
Option 2  
Option 2  
If the audio system is set up in one room, and  
the television (with or without additional  
speakers) in another, set the television to  
Option 2 and the audio system to Option 2.  
36  
 
 
>> Connect and operate an audio system  
Program the AV setup with Beo5  
If your television has been set up in an  
AV system, you may need to set it to the  
correct Option with Beo5. Switch the  
entire system to standby first.  
Option setting for the television …  
>Placeꢀyourselfꢀinꢀfrontꢀofꢀtheꢀtelevision.ꢀ  
>Whileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby),ꢀ  
pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SetupꢀmenuꢀonꢀBeo5.ꢀ  
>Letꢀgoꢀofꢀbothꢀbuttons.ꢀ  
>PressꢀOption PgmꢀtoꢀbringꢀupꢀtheꢀOptionꢀ  
ProgrammingꢀdisplayꢀonꢀBeo5.ꢀ  
>Pressꢀtheꢀbuttonꢀthatꢀmatchesꢀtheꢀzoneꢀinꢀ  
whichꢀtheꢀtelevisionꢀisꢀplaced,ꢀforꢀexample,ꢀ  
Tv Area.ꢀ  
Option setting for the audio system …  
>Placeꢀyourselfꢀinꢀfrontꢀofꢀtheꢀaudioꢀsystem.ꢀ  
>Whileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby),ꢀ  
pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SetupꢀmenuꢀonꢀBeo5.ꢀ  
>Letꢀgoꢀofꢀbothꢀbuttons.ꢀ  
>PressꢀOption PgmꢀtoꢀbringꢀupꢀtheꢀOptionꢀ  
ProgrammingꢀdisplayꢀonꢀBeo5.ꢀ  
>Pressꢀtheꢀbuttonꢀthatꢀmatchesꢀtheꢀzoneꢀinꢀ  
whichꢀtheꢀaudioꢀsystemꢀisꢀplaced,ꢀforꢀexample,ꢀ  
Audio Area.ꢀ  
37  
 
>> Connect and operate an audio system  
Use an audio/video system  
If you integrate your audio system and  
your television, you can choose a  
speaker combination appropriate to the  
current video or audio programme, and  
also record video sound on the audio  
system.  
Zone ‘A’  
TV  
LIST  
AV  
TV  
Zone ‘A’  
TV  
TV  
LIST  
AV  
TV  
TV  
To listen to sound from a television source  
on your audio system speakers without  
switching on the screen, press LIST and use  
the navigation button up or down to bring  
up AV in the Beo4 display , then press TV.  
(Beo5: Select the zone for your audio system  
speakers, then press a source button, such  
as TV). Beo4 instruction is shown to the  
right and Beo5 instruction to the left.  
To listen to sound from a television source on  
your audio system speakers with the screen  
switched on, press TV, press LIST and use  
the navigation button up or down to bring  
up AV in the Beo4 display, then press TV  
again. (Beo5: Press TV, then select the zone  
for your audio system speakers and press TV  
again). Beo4 instruction is shown to the right  
and Beo5 instruction to the left.  
Zone ‘B’  
CD  
LIST  
AV  
CD  
To listen to audio sound on the speakers  
connected to the television, press LIST and  
use the navigation button up or down to  
bring up AV in the Beo4 display , then press  
CD. (Beo5: Select the zone for speakers  
connected to the television, and then press  
an audio source button, such as CD). Beo4  
instruction is shown to the right and Beo5  
instruction to the left.  
38  
 
Distribute sound and picture with BeoLink  
Ifꢀyourꢀtelevisionꢀisꢀequippedꢀ  
withꢀtheꢀoptionalꢀSystemꢀModule,ꢀ  
youꢀcanꢀconnectꢀandꢀsetꢀupꢀaꢀ  
BeoLinkꢀsystemꢀtoꢀseeꢀpicturesꢀ  
andꢀhearꢀsoundꢀinꢀlinkꢀrooms.ꢀ  
Link connections  
To the MASTER LINK socket on  
the link room system  
MASTER  
LINK  
Forꢀexample,ꢀyouꢀcanꢀconnectꢀ  
yourꢀtelevisionꢀinꢀtheꢀlivingꢀroomꢀ  
toꢀanotherꢀvideoꢀsystemꢀorꢀsetꢀofꢀ  
speakersꢀinꢀanotherꢀroom,ꢀ  
therebyꢀmakingꢀitꢀpossibleꢀtoꢀ  
‘move’ꢀtheꢀpictureꢀorꢀsoundꢀtoꢀ  
otherꢀrooms.ꢀ  
AERIAL  
RF OUT  
Video signal distribution to link  
rooms  
RF Link  
Amplifier  
IfꢀyouꢀhaveꢀaꢀBeoLinkꢀdistributionꢀ  
systemꢀinstalled,ꢀyouꢀcanꢀeitherꢀ  
useꢀyourꢀtelevisionꢀinꢀtheꢀmainꢀ  
room,ꢀsuchꢀasꢀaꢀlivingꢀroom,ꢀorꢀ  
inꢀaꢀlinkꢀroom,ꢀsuchꢀasꢀaꢀstudyꢀorꢀ  
bedroom.ꢀ  
The main room television must be  
connected to the link room system with  
a Master Link cable:  
If an audio system is already connected to  
the Master Link socket and you wish to  
connect more equipment, the Master Link  
cable must be split in two and joined with  
the cable from the link room using a special  
junction box. Contact your Bang & Olufsen  
retailer for assistance.  
>ConnectꢀtheꢀMasterꢀLinkꢀcableꢀtoꢀtheꢀ  
socketꢀmarkedꢀMASTERꢀLINKꢀonꢀtheꢀ  
television.ꢀ  
Underꢀcertainꢀcircumstances,ꢀitꢀ  
mayꢀbeꢀnecessaryꢀtoꢀenterꢀ  
modulatorꢀsettings.ꢀ  
>Ifꢀyouꢀwantꢀtoꢀdistributeꢀvideoꢀsignalsꢀasꢀ  
well,ꢀconnectꢀanꢀordinaryꢀaerialꢀcableꢀtoꢀ  
theꢀsocketꢀmarkedꢀRFꢀOUTꢀonꢀtheꢀ  
Digital signals (HDMI) cannot be distributed  
from a main room television to the link room  
television.ꢀThenꢀrunꢀtheꢀaerialꢀcableꢀtoꢀtheꢀ system.  
RFꢀLinkꢀAmplifierꢀandꢀtheꢀMasterꢀLinkꢀ  
cableꢀtoꢀtheꢀlinkꢀroom.ꢀFollowꢀtheꢀ  
instructionsꢀenclosedꢀwithꢀtheꢀlinkꢀroomꢀ  
equipment.ꢀ  
39  
 
 
>> Distribute sound and picture with BeoLink  
System modulator  
Link frequency  
If you have an audio setup, such as a  
BeoLink Active/Passive, and you choose  
to set up a non-linkable television in the  
same room, you must set the system  
modulator to ON. The factory setting is  
AUTO, which must be used if you are  
using a linkable Bang & Olufsen  
television.  
If, for example, a TV channel in your  
area is broadcasted on the same  
LINK TUNING  
frequency as the factory setting for the  
BeoLink system; 599 MHz, you must tune  
the system modulator to an unoccupied  
frequency. When you change the link  
frequency in the main room television,  
make sure that the link frequency in the  
FREQUENCY  
TV SYSTEM  
MODULATOR  
599  
B/G  
AUTO  
link room television corresponds to it.  
The LINK TUNING menu.  
To switch on the system modulator …  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ To change the link frequency …  
LINK TUNING  
OPTIONS.ꢀ  
>BringꢀupꢀtheꢀTVꢀSETUPꢀmenuꢀandꢀhighlightꢀ  
OPTIONS.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀ  
CONNECTIONS.  
FREQUENCY  
FINE TUNE  
TV SYSTEM  
599  
0
B/G  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
OPTIONSꢀmenuꢀandꢀhighlightꢀ  
CONNECTIONS.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
CONNECTIONSꢀmenu,ꢀandꢀhighlightꢀLINKꢀ  
TUNING.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
CONNECTIONSꢀmenu,ꢀandꢀhighlightꢀLINKꢀ  
TUNING.ꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
LINKꢀTUNINGꢀmenuꢀandꢀhighlightꢀ  
MODULATOR.  
The LINK FREQUENCY menu.  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
LINKꢀTUNINGꢀmenuꢀandꢀhighlightꢀ  
FREQUENCY.  
When tuning in the link frequency in the link  
room, a test image is shown. FINE TUNE is  
only available in link room/Option 4 setups.  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
revealꢀON.ꢀꢀ  
>Useꢀtheꢀnavigationꢀbuttonꢀleftꢀorꢀrightꢀtoꢀ  
findꢀanꢀunusedꢀfrequency.ꢀꢀ  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ  
setting,ꢀorꢀ…  
>Pressꢀtheꢀcentreꢀbuttonꢀtoꢀstoreꢀtheꢀ  
setting,ꢀorꢀ…  
>ꢀpressꢀandꢀholdꢀBACK toꢀleaveꢀallꢀmenusꢀ  
withoutꢀstoring.ꢀꢀ  
>ꢀpressꢀandꢀholdꢀBACK toꢀleaveꢀallꢀmenusꢀ  
withoutꢀstoring.ꢀꢀ  
40  
 
Your television in a link room  
IfꢀyouꢀhaveꢀBeoLinkꢀinstalledꢀinꢀ  
yourꢀhomeꢀandꢀyouꢀchooseꢀtoꢀ  
placeꢀyourꢀtelevisionꢀinꢀaꢀlinkꢀ  
room,ꢀyouꢀcanꢀoperateꢀallꢀ  
connectedꢀsystemsꢀthroughꢀtheꢀ  
television.  
Option setting  
For your entire system to function  
properly, it is essential that the  
Main room  
Link room  
television in the link room is set to the  
correct Option before you connect it to  
the television in the main room!  
Option 6*  
You must follow the procedure  
described below when you connect  
your television for use in a link room:  
1 Connect the link room television to  
the mains  
With Beo4 …  
>Whileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby),ꢀ  
pressꢀLISTꢀonꢀBeo4.ꢀ  
>Letꢀgoꢀofꢀbothꢀbuttons.ꢀ  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀOPTION?ꢀinꢀtheꢀ  
Beo4ꢀdisplayꢀandꢀpressꢀtheꢀcentreꢀbutton.  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀV.OPTꢀinꢀtheꢀBeo4ꢀ  
displayꢀandꢀpressꢀ6*.ꢀ  
*If you connect the television for use in a link  
room where other link systems are already  
connected, such as speakers, you must set  
the television to Option 5 instead.  
2 Using your remote control,  
programme the link room  
television to the correct Option  
3 Disconnect the link room television  
from the mains  
4 Make the necessary connections  
5 Reconnect the link room television  
to the mains.  
With Beo5 …  
>Placeꢀyourselfꢀinꢀfrontꢀofꢀtheꢀlinkꢀroomꢀ  
television.ꢀ  
>Whileꢀholdingꢀtheꢀ•ꢀbuttonꢀ(standby),ꢀ  
pressꢀtheꢀcentreꢀbuttonꢀtoꢀbringꢀupꢀtheꢀ  
SetupꢀmenuꢀonꢀBeo5.ꢀ  
>Letꢀgoꢀofꢀbothꢀbuttons.ꢀ  
>PressꢀOption PgmꢀtoꢀbringꢀupꢀtheꢀOptionꢀ  
ProgrammingꢀdisplayꢀonꢀBeo5.ꢀ  
>Pressꢀtheꢀbuttonꢀthatꢀmatchesꢀtheꢀzoneꢀinꢀ  
whichꢀtheꢀtelevisionꢀisꢀplaced.ꢀ  
41  
 
 
>> Your television in a link room  
Link room operation  
When you are in the link room, you can  
operate all connected systems with the  
remote control.  
Listen to stereo sound in your link  
room …  
Main room  
Link room  
Usually sound distributed from a main room  
video source, such as a set-top box, to the  
link room is transmitted in mono. However,  
you can select stereo sound:  
Use sources present only in one of the  
rooms …  
>Pressꢀtheꢀbuttonꢀforꢀtheꢀsourceꢀyouꢀwishꢀ  
toꢀuse,ꢀforꢀexampleꢀRADIO.ꢀ  
> PressꢀTVꢀtoꢀswitchꢀonꢀtheꢀtelevision.ꢀ  
>PressꢀLIST andꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀAVꢀinꢀtheꢀBeo4ꢀ  
display.ꢀ(Beo5:ꢀPressꢀAV toꢀbringꢀupꢀaꢀ  
sourceꢀdisplay).ꢀ  
>Operateꢀtheꢀselectedꢀsourceꢀasꢀusual.ꢀ  
Use a main room source – source type  
present in both rooms …  
>PressꢀLISTꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀLINKꢀinꢀtheꢀBeo4ꢀ  
display.ꢀ(Beo5:ꢀPressꢀLinkꢀtoꢀbringꢀupꢀaꢀ  
sourceꢀdisplay).ꢀ  
>Press,ꢀforꢀexampleꢀDTV,ꢀtoꢀactivateꢀaꢀ  
sourceꢀconnectedꢀtoꢀtheꢀmainꢀroomꢀ  
television,ꢀsuchꢀasꢀaꢀset-topꢀbox.ꢀ  
>Pressꢀtheꢀbuttonꢀforꢀtheꢀsourceꢀyouꢀwishꢀ  
toꢀuse,ꢀforꢀexampleꢀTV.ꢀ  
Whileꢀusingꢀthisꢀfunction,ꢀdistributionꢀofꢀ  
otherꢀmainꢀroomꢀsourcesꢀtoꢀotherꢀlinkꢀroomꢀ  
systemsꢀisꢀnotꢀpossible.ꢀ  
>Operateꢀtheꢀsourceꢀasꢀusual.ꢀ  
Use a link room source – source type  
present in both rooms …  
>Pressꢀtheꢀbuttonꢀforꢀtheꢀsourceꢀyouꢀwishꢀ  
toꢀuse,ꢀforꢀexampleꢀTV.ꢀ  
>Operateꢀtheꢀsourceꢀasꢀusual.ꢀ  
42  
 
Two televisions in the same room  
Ifꢀyouꢀhaveꢀplacedꢀyourꢀtelevisionꢀ  
inꢀaꢀroomꢀwhereꢀyouꢀalreadyꢀ  
haveꢀaꢀBangꢀ&ꢀOlufsenꢀtelevision,ꢀ  
andꢀcommandsꢀfromꢀyourꢀ  
remoteꢀcontrolꢀcanꢀbeꢀreceivedꢀ  
byꢀbothꢀtelevisions,ꢀyouꢀmustꢀ  
changeꢀtheꢀOptionꢀsettingꢀofꢀtheꢀ  
television.ꢀThisꢀpreventsꢀ  
One remote control for both televisions  
For your television to function properly,  
it is essential that the television is set to  
the correct Option, see page 41 for  
information on Option programming. If  
you have a Beo4, you must set your  
television to Option 4, and if you have a  
Beo5, you must set the television to the  
correct zone*.  
BeoVision 8  
Option 4  
LIST  
LINK  
TV  
simultaneousꢀactivationꢀofꢀbothꢀ  
televisions.ꢀ  
When you Option program the  
television, disconnect the television  
you do not want to program from  
the mains. This ensures that only the  
television, you want to program,  
receives the Option programming.  
Beo4 – Operate your television in  
Option 4 …  
TV  
Normally, you can activate a source, such  
as TV, simply by pressing the relevant  
source button on your remote control.  
However, when you set your television  
to Option 4, you must do the following,  
if you have a Beo4:  
Beo4 operation.  
BeoVision 8  
Zone ‘A’  
>PressꢀLIST*ꢀandꢀuseꢀtheꢀnavigationꢀbuttonꢀ  
upꢀorꢀdownꢀtoꢀbringꢀupꢀLINKꢀinꢀtheꢀBeo4ꢀ  
display.ꢀ  
Zone ‘A’  
TV  
>Pressꢀaꢀsourceꢀbutton,ꢀsuchꢀasꢀTV.ꢀ  
BeoVision 8  
Zone ‘B’  
*In order to display LINK on Beo4, you must  
first add it to the Beo4 list of functions. See  
the Guide enclosed with your Beo4.  
Zone ‘B’  
TV  
Beo5 operation.  
*NOTE! For information about choice of zone,  
contact your Bang & Olufsen retailer.  
43  
 
 

Acer Flat Panel Television X233H User Manual
Acomdatacom Personal Computer The Executive User Manual
Acu Rite Thermometer 00591W User Manual
ADTRAN Welding System NT1 T400 User Manual
Akai Computer Hardware IB 4ADT User Manual
Alvin Mobility Aid DC778 34 User Manual
AOC Flat Panel Television L32W961 User Manual
AO Smith Water Heater BTH 120 A User Manual
Atlantis Land Switch A02 G8 User Manual
Behringer Music Pedal AB200 User Manual