Atmel Stereo Amplifier ATR7040 User Manual

Features  
Frequency Range 5 GHz to 6 GHz  
Pout 25 dBm at 5.8 GHz  
Gain Typically 30 dB  
Pin Typically 0 dBm  
VCC 2.7V to 3.8V  
Power Consumption in Power-down Mode Typically < 1 µA  
Package: QFN16 3 mm × 3 mm  
5.8 GHz WDCT  
Power Amplifier  
Benefits  
Biasing Control Extends Battery Time  
Simple Input and Output Matching  
Only One Single Supply Required  
No High-side Switching Transistor Required  
ATR7040  
1. Description  
1.1  
Process  
This 5-GHz power amplifier (PA) is designed using Atmel’s Silicon-Germanium (SiGe)  
process and provides high efficiency.  
1.2  
Circuitry  
The PA, ATR7040, consists of a three-stage amplifier with a typical output power of  
25 dBm. The output stage was implemented using an open-collector structure. Power  
up, power down, and output level are controlled at bias control pin 6 (Vctl).  
4868C–DECT–05/06  
 
ATR7040  
2. Pin Configuration  
Figure 2-1. Pinning QFN16  
16 15 14 13  
NC  
RFOUT/VCC3  
RFOUT/VCC3  
NC  
12 NC  
11 NC  
1
2
3
4
ATR7040  
10 RFIN  
GND on the  
PADDLE  
9
NC  
5
6
7
8
Table 2-1.  
Pin Description  
Pin  
Symbol  
NC  
Function  
Not connected(1)  
1
2
RFOUT  
RFOUT  
NC  
RF output and supply voltage for output amplifier stage  
RF output and supply voltage for output amplifier stage  
Not connected(1)  
3
4
5
NC  
Not connected(1)  
6
VCC2  
VCC1  
NC  
Supply voltage for second amplifier stage  
Supply voltage for first amplifier stage  
Not connected(1)  
7
8
9
NC  
Not connected(1)  
10  
RFIN  
NC  
RF input  
Not connected(1)  
11  
12  
NC  
Not connected(1)  
13  
VCTL  
GND  
VCC_CTL  
NC  
Control voltage for power ramping  
Ground  
14  
15  
Supply voltage for biasing control block  
Not connected(1)  
16  
PADDLE  
Ground  
Note:  
1. Pin can be connected to paddle for increased GND area  
3
4868C–DECT–05/06  
 
3. Absolute Maximum Ratings  
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating  
only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this  
specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.  
Parameters  
Symbol  
VCC  
Icc  
Value  
Unit  
V
Supply voltage  
5
400  
Supply current  
mA  
°C  
Junction temperature  
Storage temperature  
Input RF power  
Control voltage  
Tj  
150  
TStg  
Pin  
–40 to +125  
10  
°C  
dBm  
V
Vctl  
2.5  
Note:  
The part may not survive all maximums applied simultaneously.  
Electrostatic sensitive device.  
Observe precautions for handling.  
4. Thermal Resistance  
Parameters  
Symbol  
Value  
Unit  
Junction ambient package QFN16, 3 × 3,  
slug soldered on PCB  
RthJA  
40  
K/W  
5. Operating Range  
Parameters  
Symbol  
VCC  
Value  
Unit  
V
Supply voltage  
2.7 to 3.8  
Operating frequency range  
Ambient temperature range  
fin  
5100 to 5900  
–25 to +75  
MHz  
°C  
Tamb  
4
ATR7040  
4868C–DECT–05/06  
 
ATR7040  
6. Electrical Characteristics  
Operating conditions: VCC = 3.6V, Vctl = 1.5V, input frequency = 5.8 GHz, input power 0 dBm, pulsed mode, duty cycle 10%, ton = 1 ms,  
Tamb = 25°C, unless otherwise specified.  
No.  
Parameters  
Test Conditions  
Pin  
Symbol  
Min.  
5100  
2.7  
Typ.  
Max.  
5900  
3.8  
Unit  
Depends on external  
circuitry  
1.0  
Frequency range  
MHz  
1.1  
1.2  
1.3  
1.4  
Supply voltage  
Vcc  
Pin  
Psat  
Pd  
3.6  
0
V
dBm  
dBm  
dB  
V
Input power  
Saturated power output  
Output power deviation  
25  
–2  
+2  
1.7  
0.2  
PA operating mode  
Power-down mode  
PA on  
Vctl  
Vctl  
Ictl  
1.0  
1.5  
Control voltage range  
V
1.6  
1.7  
1.8  
Control input current  
Input return loss  
Isolation  
5
90  
–7  
35  
µA  
dB  
dB  
With external matching  
Vctl 0.2V  
10  
–6  
ISOr  
PAE  
Icc  
33  
At power saturation,  
Pin = 0 dBm  
1.9  
Power added efficiency  
35  
250  
1
%
mA  
µA  
%
1.10 Current consumption  
For 25 dBm output power  
Current consumption in  
1.11  
Vctl 0.2V  
Icc  
power-down mode  
1.12 Duty cycle of operation  
At saturated output power  
100  
7. Application Circuit  
Figure 7-1. Application Circuit  
VCC  
C6  
slug  
8
7
6
5
L1  
9
4
3
RFIN  
TRL1  
10  
11  
12  
C3  
RFOUT  
TRL2  
2
1
C1  
C2  
13 14 15 16  
VCTL  
VCC  
5
4868C–DECT–05/06  
 
8. Diagrams  
Figure 8-1. Output Power, Efficiency and Supply Currents Versus Input Frequency  
Pin = 0 dBm, Vcc = 3.6V, Vctl = 1.4V  
40  
35  
30  
25  
20  
15  
400  
350  
300  
250  
200  
150  
10 0  
50  
PAE (%)  
Iges (mA)  
Pout (dBm)  
10  
0
5600  
5650  
5700  
5750  
5800  
5850  
5900  
5950  
6000  
Frequency (MHz)  
Figure 8-2. Output Power, Gain, Efficiency and Supply Currents Versus Input Power  
Freq = 5800 MHz, Vcc = 3.6V, Vctl = 1.4V  
40  
30  
20  
10  
400  
350  
300  
250  
200  
150  
10 0  
50  
Gain (dB)  
PAE (%)  
0
-10  
-20  
-30  
Iges (mA)  
Pout (dBm)  
0
-20  
-15  
-10  
-5  
0
5
Pin (dBm)  
Figure 8-3. Output Power, Efficiency and Supply Currents Versus Operating Voltage  
Freq = 5800 MHz, Pin = 0 dBm, Vctl = 1.5V  
40  
35  
30  
25  
20  
15  
450  
400  
350  
300  
250  
200  
150  
10 0  
50  
PAE (%)  
Iges (mA)  
Pout (dBm)  
10  
0
2.5  
3.0  
3.5  
4.0  
Vcc (V)  
6
ATR7040  
4868C–DECT–05/06  
 
ATR7040  
9. Ordering Information  
Extended Type Number  
Package  
Remarks  
ATR7040-PVPG  
QFN16, 3 × 3  
QFN16, 3 × 3  
Taped and reeled, MOQ 2000, Pb-free  
Taped and reeled, MOQ 8000, Pb-free  
ATR7040-PVQG  
10. Package Information  
Package: QFN 16 - 3x3  
Exposed pad 1.7x1.7  
(acc. JEDEC OUTLINE No. MO-220)  
Dimensions in mm  
3
0.9 0.1  
+0  
1.7  
Not indicated tolerances 0.05  
0.05  
-0.05  
16  
1
13  
8
16  
5
12  
9
1
technical drawings  
according to DIN  
specifications  
4
4
0.5 nom.  
1.5  
Drawing-No.: 6.543-5115.01-4  
Issue: 1; 07.03.05  
Assembly Chip PAC  
7
4868C–DECT–05/06  
 
Atmel Corporation  
Atmel Operations  
2325 Orchard Parkway  
San Jose, CA 95131, USA  
Tel: 1(408) 441-0311  
Fax: 1(408) 487-2600  
Memory  
RF/Automotive  
Theresienstrasse 2  
Postfach 3535  
74025 Heilbronn, Germany  
Tel: (49) 71-31-67-0  
Fax: (49) 71-31-67-2340  
2325 Orchard Parkway  
San Jose, CA 95131, USA  
Tel: 1(408) 441-0311  
Fax: 1(408) 436-4314  
Microcontrollers  
Regional Headquarters  
2325 Orchard Parkway  
San Jose, CA 95131, USA  
Tel: 1(408) 441-0311  
Fax: 1(408) 436-4314  
1150 East Cheyenne Mtn. Blvd.  
Colorado Springs, CO 80906, USA  
Tel: 1(719) 576-3300  
Europe  
Atmel Sarl  
Route des Arsenaux 41  
Case Postale 80  
CH-1705 Fribourg  
Switzerland  
Tel: (41) 26-426-5555  
Fax: (41) 26-426-5500  
Fax: 1(719) 540-1759  
Biometrics/Imaging/Hi-Rel MPU/  
High-Speed Converters/RF Datacom  
Avenue de Rochepleine  
La Chantrerie  
BP 70602  
44306 Nantes Cedex 3, France  
Tel: (33) 2-40-18-18-18  
Fax: (33) 2-40-18-19-60  
BP 123  
38521 Saint-Egreve Cedex, France  
Tel: (33) 4-76-58-30-00  
Fax: (33) 4-76-58-34-80  
Asia  
Room 1219  
Chinachem Golden Plaza  
77 Mody Road Tsimshatsui  
East Kowloon  
Hong Kong  
Tel: (852) 2721-9778  
Fax: (852) 2722-1369  
ASIC/ASSP/Smart Cards  
Zone Industrielle  
13106 Rousset Cedex, France  
Tel: (33) 4-42-53-60-00  
Fax: (33) 4-42-53-60-01  
1150 East Cheyenne Mtn. Blvd.  
Colorado Springs, CO 80906, USA  
Tel: 1(719) 576-3300  
Japan  
9F, Tonetsu Shinkawa Bldg.  
1-24-8 Shinkawa  
Chuo-ku, Tokyo 104-0033  
Japan  
Tel: (81) 3-3523-3551  
Fax: (81) 3-3523-7581  
Fax: 1(719) 540-1759  
Scottish Enterprise Technology Park  
Maxwell Building  
East Kilbride G75 0QR, Scotland  
Tel: (44) 1355-803-000  
Fax: (44) 1355-242-743  
Literature Requests  
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any  
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMELS TERMS AND CONDI-  
TIONS OF SALE LOCATED ON ATMELS WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY  
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-  
TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT  
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no  
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications  
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided  
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use  
as components in applications intended to support or sustain life.  
© 2006 Atmel Corporation. All rights reserved. Atmel®, logo and combinations thereof, Everywhere You Are® and others are registered trade-  
marks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.  
4868C–DECT–05/06  
 

888 Digital Video Games S136 User Manual
Aastra Telecom Telephone 9116 User Manual
Acer Laptop VDT39V1001 User Manual
Alliance Laundry Systems Speaker 9001889R7 User Manual
AMCC Computer Accessories 9500S User Manual
ATI Technologies Computer Hardware X1650 User Manual
Atlona Printer AT HD V22M User Manual
Avenview TV Cables SPLIT HDSDI 6 User Manual
Behringer Electronic Keyboard EG8280USB User Manual
Behringer Music Pedal VD1 User Manual